We will be closed in recognition of the Good Friday holiday on April 10, 2020.
Click here for updates on our business status, shipping, and delivery.

Interior Cable Guide Assembly Kit

Product Description

The Interior Cable Guide Assembly Kit is an add-on kit that provides a cable guide for interior window shades. It helps control the movement of the hem bar as it travels up and down to keep the shade from twisting. The cable is cut to length in the field. This is an add-on kit and can be quoted and ordered through DraperOnline for use with the following products: Clutch-Operated FlexShade, Clutch-Operated FlexShade NEXD, Motorized FlexShade (including coupled shades), and FlexShade 2.

Product Specs

  • Kit utilizes a 5/8” (16 mm) round bar in a 1-5/8” (41 mm) open-ended hem pocket.
  • Kit includes all options for wall-mount, deck-mount, brackets only, and fascia mounting.
  • For details and information regarding use on a sloped façade, contact Draper.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.


The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label

Part Numbers

Related Videos

Related Motors & Accessories

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

What could we improve? (required)
Please enter the following characters to help us prevent spam: