4 Motor Controller

Intelligent 4 Motor Controller for Shades, Venetian Blinds, and Louver Systems

The 4 Motor Controller offers a four AC motor controller intended to be used as part of the IntelliFlex I/O smart motor control system. It comes with built-in network termination and on-board buttons for testing and motor configuration. Pluggable terminal blocks for easier wiring and onboard contact closure terminal connections provide local control. Flexible programming options allow each motor port to be operated independently. Fully integrated, the IntelliFlex I/O smart motor control system with the 4MC can be used with all of the peripherals that are available within the I/O line. Installers will no longer need to use a computer to program the motors and assign groups. Controller comes pre-installed in metal enclosure.
 

Product Specs

  • Can be configured to respond to wall switches, RF remotes, and signals from third-party systems.
  • Works with motorized roller shading and louver systems, or Venetian blinds.
  • Controller dimensions: 3-1/2” x 7” x 1-7/8” (89 mm x 178 mm x 48 mm). Enclosure: 8” x 8” x 4” (203 mm x 203 mm x 102 mm).
  • Input power: 110-230VAC @ 50 / 60Hz.
  • Output power: Maximum 4A @ input Voltage.
  • Operating temp: 32-140° F, 0-60° C.
  • Network bus: RS-485.

ANSI/WCMA A100.1-2022 Child Safety Standard

Effective June 1, 2024, in compliance with the updated ANSI/WCMA A100.1-2022 child safety standard, all Draper window shades operated by a bead chain will be furnished with a tensioned hold-down device that is permanently attached and partially disables the product if not installed correctly. This hold-down should be installed with tension on the chain.

All bead chain operated window shades will include:

  • Permanently installed spring-loaded tensioned hold-down device
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included. Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using appropriate hardware for the site conditions. Consult with contractors and builders as needed.

If the tension device is not installed with appropriate tension on the bead chain, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain.

Approved permanent warning label

Learn more about the new child safety standard

At the link below, you can see more information about the new child safety standard, mounting methods for the tensioned hold-down device, alternatives to bead chain products, and more.

Click here for more information
Tensioned hold-down device

Supporting Documents

Click the and icons to navigate the folders. Click the document name to download.

Skip Navigation Links.

Part Numbers

  • C156.286/C156.286SA - 4 Motor Controller

Related Motors & Accessories

Got a question?

We've got answers. Contact us about window shades with the form below and let us know how we can help you deliver on your projects.

Your location:

   

We have automatically detected your location, shown above. If your correct home territory is not shown, please select the correct one so that we may accurately route your question.

What type of installation?


What's your question?

Tell us about yourself.



Your Drape‍r contact information:

Need to contact someone immediately? Your Draper contacts are shown below.

Corey Photo
Corey Smith
Commercial Sales Account Representative - Mid-Atlantic U.S.
corey.smith@draperinc.com
267.668.2076
Logo Photo
Architectural Sales Consultant Team
Contact Info:
commercialshades@draperinc.com
800-238-7999
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman