Dual Zone Wall Switch

Product Description

Smart user input device, IntelliFlex I/O Dual Zone Wall Switch can be customized to operate roller shades and Venetian blinds. Program to control two individual zones with a single touch. Zone can be configured to control any number of roller shade motors in an IntelliFlex I/O network. Configuration performed through on board programming buttons without rewiring or external devices. Swipe gestures quickly move shades between preset stop positions. Power and communication provided through a single Ethernet cable. Integrated LEDs offer real time status for an easier user process experience.
 

Product Specs

  • Dimensions: 4-1/8” x 1-3/4” x 7/8” (105 mm x 45 mm x 22 mm).
  • Input: 24V DC.
  • Operating temp: ambient.
  • Standard Decora size and fits into any standard single gang box.
  • Two independent control zones.
  • Provides signal to third party system via the IntelliFlex I/O network.
  • Can be used with any number of intermediate stops or no stops at all.
  • Integrated LEDs provide system status to users.
  • Network Device Connector included.
  • Fully customizable graphics.
  • Constructed of ABS plastic.
  • Indoor use only.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Our spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label

Supporting Documents

Click the and icons to navigate the folders. Click the document name to download.

Skip Navigation Links.

Part Numbers

  • C112.162 - Dual Zone Wired Switch

Videos

Case Studies

Related Motors & Accessories

Got a question?

We've got answers. Contact us about window shades with the form below and let us know how we can help you deliver on your projects.

Your location:

   

We have automatically detected your location, shown above. If your correct home territory is not shown, please select the correct one so that we may accurately route your question.

What type of installation?


What's your question?

Tell us about yourself.



Your Drape‍r contact information:

Need to contact someone immediately? Your Draper contacts are shown below.





Krystyna Photo
Krystyna Biggs
Window Shade Sales Consultant
krystyna.biggs@draperinc.com
765.856.1281
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman