Central Network Controller

Product Description

The Central Network Controller (CNC) acts as a router between control and IP networks. It allows communication between networks and IP integration with other systems for whole building automation and large-scale sun tracking with the IntelliFlex I/O network. The CNC allows the logging of shade movements, sensor readings, user overrides, and adds automated glare control and scheduling. This touchscreen device brings advanced functionality to an IntelliFlex I/O network with graphical user interfaces (GUI) and remote accessible web interfaces for multi-user access.
 

Product Specs

  • CNC dimensions: 7-3/4” x 4-1/2” x 2” (197 mm x 114 mm x 51 mm). Rough cut-out dimensions: 8” x 5” x 1-3/4” (203 mm x 127 mm x 44 mm).
  • BACnet/IP integration.
  • 7” (18 cm) touchscreen interface.
  • Web-based interface to monitor and override network devices.
  • Unlimited number of automated glare control zones and scheduled events.
  • Support for individual user profiles and permissions.
  • Logging of system events.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Our spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label

Supporting Documents

Click the and icons to navigate the folders. Click the document name to download.

Skip Navigation Links.

Part Numbers

  • C156.271 - Central Network Controller

Related Motors & Accessories

Got a question?

We've got answers. Contact us about window shades with the form below and let us know how we can help you deliver on your projects.

Your location:

   

We have automatically detected your location, shown above. If your correct home territory is not shown, please select the correct one so that we may accurately route your question.

What type of installation?


What's your question?

Tell us about yourself.



Your Drape‍r contact information:

Need to contact someone immediately? Your Draper contacts are shown below.

Chuck Photo
Chuck Raible
Regional Sales Manager - Architectural Products, Mid-Atlantic USA
chuck.raible@draperinc.com
804.778.0036
Krystyna Photo
Krystyna Biggs
Window Shade Sales Consultant
krystyna.biggs@draperinc.com
765.856.1281
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman