FlexShade® ZIP XL

At up to 25’ wide, the FlexShade® ZIP XL utilizes an improved Zip 127 headbox with an integrated cradle support system to allow wider widths and minimize deflection. Zipped fabric panel edges are welded and held inside inner channels in the side guide. Cushioning pads dampen the movement of fabric under wind load and panels are held in place. This exterior window shading system prevents heat from entering a building, lowering HVAC costs. In outdoor covered spaces—such as garages, porches, or commercial food service areas—it keeps harsh glare out and protects against wind and insects, creating a more pleasant outdoor experience. For added protection against fabric damage, the FlexShade® Zip XL can be paired with an Obstacle Detection Motor.
  • Available in sizes up to 25' wide x 15' high (762 cm x 457 cm), depending on fabric selection.
  • Uses ZIP 127 headbox: 5” H (127 mm) headbox.
  • Two Headbox Styles: angled and curved.
  • Hardware finish is silver (standard), textured powder coat is available in white, black, ivory, or charcoal bronze. Custom powder coat colors available.
  • Side guides can be jamb or face mounted.
  • Side channel width is only 1-3/4" (44 mm).
  • No light gap at side channels for complete edge blackout system.
  • Can serve as an operable insect screen or room divider.
  • Provides excellent protection against wind.
  • Weighted hem bar to stabilize shade during operation.
  • Available with RTS obstacle detection motor or standard motors.
  • Product designed for exterior and interior use.

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label
 
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)