Product Specs
-
Sizes available up to 8' wide (244 cm), depending on fabric selection.
-
Combine glare control fabric with room darkening or LightBloc FlexShade (side-and-sill channel) for complete blackout.
-
Mounting brackets (standard). Optional fascia with endcaps, or headbox with closure.
-
Hardware finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
-
Dual roller pocket headbox is white (standard) where visible at the ceiling line.
-
Headbox can be installed in ceiling in advance of shades.
-
Accommodates Motorized FlexShade, Battery-Operated FlexShade, and 24V FlexShade.
-
Shades may be coupled, minimizing wiring and use of motors.
-
All Draper motorization and control options are available for dual roller shades.
-
Product designed for interior use.
ANSI/WCMA A100.1 Compliance
If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.
If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.
Compliant window shades will include:
- Pre-installed spring-loaded chain tension device with bead chain threaded through it
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included
If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.
Testing
The testing required by the WCMA for products to comply with safety standard A100.1 includes:
- UV stability testing - AATCC Test Method 16 for UV Stability
- Impact testing - ASTM D5420
- Bead chain durability testing
- Operation cycle testing - 3,000 cycles per the standard
Our spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label
Supporting Documents
Click the
and
icons to navigate the folders. Click the document name to download.
Part Numbers
Related Motors & Accessories