FlexShade ZIP

Outdoor Shading System—ZIP Side Channels Create Shading/Weather/Insect Barriers

Featured in the Drape‍r@Home collection

FlexShade ZIP brings the comfort and security of the indoors outside. Enjoy the benefit of expanding usable square footage in both living and business areas without costly renovations. The ZIP offers unique side channels that ensure a sealed enclosure for existing garages, porches, patios, pool houses, and outdoor commercial food service areas. Easily create outdoor workspaces, elegant areas for dining and entertaining, or relaxing outdoor niches that are protected from the sun, wind, rain, and pesky insects. When used as an outdoor shading system, FlexShade ZIP prevents heat from entering a building and helps to lower HVAC costs.

Fabric Options

Large Format Printing

Warranty Ready to purchase

Product Specs

Available in sizes up to 16' wide x 10' high (488 cm x 305 cm), depending on fabric selection.

Two headbox sizes available: ZIP 92: 3-5/8” high (92 mm) headbox and ZIP 127: 5” high (127 mm) headbox.

Three headbox styles: square, angled (ZIP 127 only), and curved.

Side channels can be jamb or face mounted.

Side channel width is only 1-3/4" (44 mm).

Hardware finish is silver (standard), textured powder coat is available in white, black, ivory, sand, or charcoal bronze. Custom powder coat colors available.

No light gap at side channels for complete edge blackout system.

Can serve as an operable insect screen or room divider.

Provides excellent protection against wind.

Weighted hem bar to stabilize shade during operation.

Available with RTS or standard motors.

Product designed for exterior and interior use.

UL Listed.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

UV stability testing - AATCC Test Method 16 for UV Stability
Impact testing - ASTM D5420
Bead chain durability testing
Operation cycle testing - 3,000 cycles per the standard

Our spring loaded tension device passed the requirements of these tests.

Supporting Documents

Click the and icons to navigate the folders. Click the document name to download.

CSI 3-Part Specification

BIM Object

Cleaning: Outdoor Shades

Hardware Overview

Warranty

BIM Support

Part Numbers

Videos

FlexShade Zip Exterior Motorized Roller Shades – Part 1: Site Preparation

To prepare the site for installation, first make sure the mounting surface is strong enough to bear the weight of the full FlexShade ZIP assembly. It is the responsibility of the installer to use appropriate fasteners for the mounting surface.

FlexShade Zip Exterior Motorized Roller Shades - Part 2: Cassette Mounting

To Mount the headbox on a Wall or ceiling using cassette brackets, simply attach the cassette brackets to the mounting surface using #10 flat head screws. It is the installer’s responsibility to choose the length of #10 flat head screw appropriate for the mounting surface. The mounting brackets must be installed level with each other. Be sure to drive the screws in flush with bracket.

FlexShade Zip Exterior Motorized Roller Shades - Part 2B: Direct Mount Instructions

To mount the headbox permanently, you will first need to attach the mounting brackets to the headbox as a spacer between the headbox and the wall. Be sure to leave a 1¾" (45mm) gap between the end cap and mounting bracket.

FlexShade Zip Exterior Motorized Roller Shades - Part 3: Installing Side Channels

This video will cover methods for installing side channels. For instructions on preparing your site for proper product installation and mounting of the FlexShade Zip Motorized Shade headbox, please see the previous instructional videos in this series. These instructions do not apply for installations using the ZIP 127 angled headbox.

FlexShade Zip Exterior Motorized Roller Shades - Part 4: Limit Setting

To begin programming with your remote, first connect power to one motor. Select a transmitter channel to assign that particular motor unit. Hold the UP and DOWN buttons until the motor jogs, and then release. Note the motor direction. To reverse the direction, hold the MY/STOP button for 5 seconds until the motor jogs. Failure to complete this step can only be corrected with a motor reset.

FlexShade Zip Exterior Motorized Roller Shades – Part 5: Advanced Programming

This video will cover advanced programming for proper operation of the shade. For instructions on proper product installation and mounting of the FlexShade Zip Motorized Shade as well as initial limit setting for the Somfy RTS Shade Motor, please see the previous instructional videos in this series.

Project Profile Window Shade Solutions: WI Governor's Mansion - FlexShade Zip

WI Governor's Mansion - Madison, WI EXTERIOR MOTORIZED FLEXSHADE ZIP SHADES featuring Phifer TuffScreen Fabric DEALER: FutureGuard INSTALLER: Baraboo Tent & Awning PHOTOGRAPHER: Barry Rustin - barryrustinphotography.com

Project Profile Window Shade Solutions: FlexShade Zip Private Residence

Residential Shade Install - Sedona, AZ FLEXSHADE EXTERIOR MOTORIZED ZIP SHADES featuring Mermet E-Screen Charcoal/Cocoa Fabric 3% Openness DISTRIBUTOR: FutureGuard DEALER & INSTALLER: Superior Sun Solutions PHOTOGRAPHER: Matt Oberer - mattophoto.net

Case Study Solar Control Solutions: The Cow: An Eatery

PRODUCT: FlexShade(R) ZIP 127 Exterior Motorized Shade FABRIC: Soltis Perform 92 - Sandy Beige DEALER: FutureGuard INSTALLER: Ace Awnings

Wind Tunnel Testing the FlexShade Zip and Zip XL

When a shade system is being used outdoors, it’s important that it be as resistant as possible to wind and weather. Our FlexShade ZIP exterior roller shade is often used to protect outdoor spaces from sun, heat, wind, and insects. We recently sent a team to learn exactly that.

Podcast: Window shades improve workplace comfort and productivity

Jeff Miller, Draper's Solar Control Product Manager, discusses how solar shading can improve the comfort and productivity of workers, and improve your company's bottom line.

Case Studies

FlexShade ZIP and FlexShade ZIP XL window shades in a private residence - Dallas, TX

FlexShade ZIP and FlexShade ZIP XL window shade provide a barrier from the sun, weather, and insects on a poolside patio in a private residence in Dallas, TX

Preserving the Essence of the Wolf Trap Experience

Protection from the elements while preserving views of the park’s beautiful natural surroundings.

Private Residence - Denville, NJ

FlexShade ZIP motorized roller shades installed in a private residence in Denville, NJ.

Rick’s Café - Naples, ME

FlexShade ZIP motorized roller shades featuring Phifer SunTex 95 5% open fabric in Black color installed at Rick’s Café, Naples, ME.

Short Hills Country Club - Short Hills, NJ

Flexshade ZIP and FlexShade ZIP XL motorized roller shades featuring Phifer SheerWeave SW2400 3% open fabric in Charcoal color installed at Short Hills Country Club in Short Hills, NJ.

The Cow - An Eatery - Morrison, CO

FlexShade ZIP 127 motorized exterior window shades at The Cow - An Eatery in Morrison, CO. “With a gas heater in the corner of the patio, the ambient temperature allows us to utilize the space in temperatures above 20°F. This is square footage that no restaurant can afford to vacate.” David Lind – Owner, The Cow – An Eatery

Related Motors & Accessories

Got a question?

We've got answers. Contact us about window shades with the form below and let us know how we can help you deliver on your projects.

Your location:

We have automatically detected your location, shown above. If your correct home territory is not shown, please select the correct one so that we may accurately route your question.