Spring Roller Shade

The classic Spring Roller FlexShade® window shade combines simple design with careful craftsmanship for economical light control and room darkening in classroom and educational applications.
  • Available in sizes up to 12’ wide x 12’high (366 cm x 366 cm), depending on fabric selection.
  • Traditional window shade operation with metal rollers and heavy-duty springs.
  • Ball-bearing style locking mechanism for smoother operation than other devices on the market, easily replaceable in the field.
  • Heavy-duty steel hardware.
  • Small or large hardware options available.
  • Pull cord included with shade.
  • Mounting brackets (standard). Optional fascia with endcaps, or headbox with closure.
  • Hardware finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
  • Kiln-dried slats made from Indiana Hard Rock Maple.
  • Varied hem bar options available.
  • Request transom-style shades to install a shade inverted on hopper windows, doors, and other operable windows.
  • Product designed for interior use.

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label
 

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)