Product Specs
-
If this product is installed in a residence or other environment where it's likely that young children will be present, it must comply with ANSI/WCMA A100.1 for safety reasons. Request compliance at the time of the order, and we will supply a pre-installed Spring-Loaded Chain Tension Device. Details here.
-
Available in sizes up to 12' wide x 12' high (366 cm x 366 cm), depending on fabric selection. Optional dual rollers available upon request.
-
Universal mounting brackets and spring-loaded idler end provide ease of installation.
-
Optional white or black universal mounting brackets to match clutch color available.
-
Optional Spring Lift Assist is available for ease-of-operation.
-
Bead chain clutch operator mounted right- (standard) or left-hand operation.
-
Clutch available in white (standard) or black.
-
Stainless steel bead chain (standard). Polyester chain available in white, black, brown, grey, or ivory at no extra charge.
-
Hardware finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
-
Hardware choices include universal brackets, endcaps with fascia, ceiling/wall or pocket style headbox.
-
Small or large hardware options available.
-
Dual roller hardware components include: Dual Roller Endcaps, Dual Roller Fascia, and Dual Roller Pocket Headbox. Options may vary by product type. See technical documents for details.
-
Dual Roller Fascia finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
-
Dual Roller Pocket Headbox finish choices: gray inside/white outside or white inside/gray outside with a white wall clip.
-
Product designed for interior use.
ANSI/WCMA A100.1 Compliance
If clutch-operated roller shades are installed in an environment where it's possible
that young children will be present, they should comply with ANSI/WCMA
A100.1, the Standard for Safety of Window Coverings.
If the shades that you purchase need to comply with this standard, it is your
responsibility to inform Draper and opt-in to receive compliant products at time of
order.
Spring-Loaded Cord Tension Device
Compliant window shades will include:
- Pre-installed spring-loaded chain tension device with bead chain threaded
through it
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included
If the tension device is not installed properly, or becomes unattached from the
mounting surface, the shade will be rendered partially inoperable. If installed
properly, the tension device will prevent the creation of a hazardous loop and
will maintain tension on the bead chain. The tension device and label require
tools to be removed.
Testing
The testing required by the WCMA for products to comply with safety standard
A100.1 includes:
- UV stability testing - AATCC Test Method 16 for UV Stability
- Impact testing - ASTM D5420
- Bead chain durability testing
- Operation cycle testing - 3,000 cycles per the standard
Our spring loaded tension device passed the requirements of these tests.
WCMA compliant hangtag warning label
Supporting Documents
Click the
and
icons to navigate the folders. Click the document name to download.
Part Numbers
Related Motors & Accessories