Dual Roller FlexShade®

Combine dual purposes into a single unit with the Dual Roller FlexShade® window shade by choosing to vertically stack two shades, or a shade and projection screen. The flexible configuration creates more project and design opportunities, including utilizing natural light, minimizing heat and glare, providing privacy during the day, delivering a near complete room darkening effect, and integrating a projection screen. This versatility makes it ideal for use within commercial, healthcare, institutional, or educational applications.
  • The following shade models have a dual roller option: Clutch-Operated FlexShade®, Clutch-Operated FlexShade® NEXD, Motorized FlexShade® (includes AC, 485 AC, RTS AC, and 50 DC), FlexShade ST30 DC, FlexShade® Battery, and FlexShade® Recharge.
  • Clutch-Operated FlexShade® NEXD is available in the standard vertically stacked option or as a horizontal dual roller.
  • Hardware components include: Dual Roller Endcaps, Dual Roller Fascia, and Dual Roller Pocket Headbox. Options may vary by product type. See technical documents for details.
  • Dual Roller Fascia finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
  • Dual Roller Pocket Headbox finish choices: gray inside/white outside or white inside/gray outside with a white wall clip.
  • Clutch-operated products can be ANSI/WCMA A100.1 compliant for areas where small children are present. Details here.
  • Product designed for interior use.

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label
 
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)