Draper offices will be closed after noon on Friday, April 19th in observance of Good Friday.
 

FlexShade® 2

The FlexShade® 2 window shade provides the ability to reduce light gap in institutional or commercial areas that contain a large span of windows. As a taller shade, it maximizes the ability to reduce light gap by minimizing the number of window shades required for coverage.
  • Available in sizes from 3' to 20' (91 cm to 609 cm) wide and 30' (914 cm) high, depending on fabric and hardware selection
  • Spring-loaded idler end provides ease of installation.
  • Mounting brackets (standard). Optional fascia with endcaps, or headbox with closure.
  • Hardware finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
  • Graphics can be printed on window shade.
  • Product designed for interior use.

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label
 
Motors and Controls for this shade.
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)