We will be closed after noon on April 18th for Good Friday.
IMPORTANT UPDATES FOR MANUAL ROLLER SHADES:
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

Dual Roller Pocket Headbox

Combine two shades or a shade and screen in one recessed headbox, with installation during construction and roller setup later.

Maximize project space with the Dual Roller Pocket Headbox, by vertically stacking two shades or a shade and projection screen inside a single recessed headbox. Installation of the headbox can be done during the construction phase, saving shade roller set-up for a later date.

Hardware Options

Fabric Options

Large Format Printing

Warranty Ready to purchase

Product Specs

Standard headbox: 5-¾" (15 cm) wide x 7-¾” (20 cm) high for manual and motorized shades. Headbox will be bent steel or three-piece extruded aluminum. Dual Roller Endcaps used for mounting shade.

Large headbox: 6-½” (17 cm) wide x 8-½” high (22 cm) for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Ceiling brackets are used for this size.

Extra-large headbox: 8-22/32" wide x 7-3/4" high for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Dual Roller Endcaps are used for mounting shade.

Suspended or flush mounting available.

Dual Roller Pocket headbox is white (standard) or grey where visible at the ceiling line. Available with or without tile lip.

Accommodates: Motorized FlexShade, Clutch FlexShade, Battery Powered FlexShade, 24V FlexShade, and LightBloc w/Side Channels.

Shades may be coupled, minimizing wiring and motor use (not suitable with LightBloc).

Product designed for interior use.

ANSI/WCMA A100.1-2022 Child Safety Standard

Effective June 1, 2024, in compliance with the updated ANSI/WCMA A100.1-2022 child safety standard, all Draper window shades operated by a bead chain will be furnished with a tensioned hold-down device that is permanently attached and partially disables the product if not installed correctly. This hold-down should be installed with tension on the chain.

All bead chain operated window shades will include:

Permanently installed spring-loaded tensioned hold-down device
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included. Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using appropriate hardware for the site conditions. Consult with contractors and builders as needed.

If the tension device is not installed with appropriate tension on the bead chain, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain.

Learn more about the new child safety standard

At the link below, you can see more information about the new child safety standard, mounting methods for the tensioned hold-down device, alternatives to bead chain products, and more.

Click here for more information

Supporting Documents

Click the and icons to navigate the folders. Click the document name to download.

Dual Roller Pocket Headbox

Part Numbers

C177.249SA - Dual Roller Pocket Headbox, Manual Shades

C177.248SA - Dual Roller Pocket Headbox, Standard Motorized

C177.250SA - Dual Roller Pocket Headbox, Large Motorized

- Contact Draper for details

Videos

Case Studies

Related Motors & Accessories

Got a question?

We've got answers. Contact us about window shades with the form below and let us know how we can help you deliver on your projects.

Your location:

We have automatically detected your location, shown above. If your correct home territory is not shown, please select the correct one so that we may accurately route your question.