Dual Roller Motorized FlexShade

Product Description

Combine dual purposes into a single unit with the Dual Roller FlexShade window shade by choosing to vertically stack two shades, or a shade and projection screen. The flexible configuration creates more project and design opportunities, including utilizing natural light, minimizing heat and glare, providing privacy during the day, delivering a near complete room darkening effect, and integrating a projection screen. This versatility makes it ideal for use within commercial, healthcare, institutional, or educational applications.

Product Specs

  • Sizes available up to 8' wide (244 cm), depending on fabric selection.
  • Combine glare control fabric with room darkening or LightBloc FlexShade (side-and-sill channel) for complete blackout.
  • Mounting brackets (standard). Optional fascia with endcaps, or headbox with closure.
  • Hardware finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
  • Dual roller pocket headbox is white (standard) where visible at the ceiling line.
  • Fabric-covered fascia available.
  • Headbox can be installed in ceiling in advance of shades.
  • Accommodates Motorized FlexShades, Battery-Operated FlexShades, and 24V FlexShades.
  • Shades may be coupled, minimizing wiring and use of motors.
  • Product designed for interior use.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label

Part Numbers

Related Motors & Accessories

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman