FlexShade Recharge

Product Description

A rechargeable, motorized window shade, the FlexShade Recharge features quiet operation and ease of installation in difficult areas with no wiring or electrician needed. An existing Clutch-Operated FlexShade can be upgraded to a battery powered FlexShade Recharge utilizing current hardware and shade fabric.

Product Specs

  • Available in sizes up to 12′ (366 cm) wide, depending on fabric selection.
  • Lower-cost entry point for motorization.
  • Shades available in single or dual roller option.
  • No battery wand. Batteries located inside motor.
  • Green product. No disposable batteries.
  • Charges from 110V outlet.
  • Installs like a manual shade. No wiring or electrician needed.
  • Product designed for interior use.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.


The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label

Part Numbers

Related Motors & Accessories

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

What could we improve? (required)
Please enter the following characters to help us prevent spam: