Topspin®

Designed for interior or exterior use, TopSpin® shading system is made up of a series of retractable fabric panels. This system features no visible cables and provides coverage for large areas of glazing. When used as a sun shade, TopSpin® allows vision to the exterior, while providing controlled interior lighting to ensure a more comfortable environment. This lightweight product features spring roller support every 3’ to 5’ (91-152 cm), which install with brackets that offset product from mounting structure.
  • System widths available up to 10’ 4” (315 cm) and can be coupled.
  • System lengths available up to 42’ 6” (1,300 cm) and can be longer depending on the application.
  • Available in four hardware colors: RAL 7016, 9001, 9010, and 9006. Custom colors available for an additional charge.
  • The system can be installed on a horizontal, sloped, vertical, curved glazing, or surfaces that slope in two directions.
  • Radius can be as tight as 3' (91 cm) for curved glazing.
  • Fabric panels installed onto spring loaded roller tubes at regular intervals for fabric support.
  • Easily place stack outside window area on roof.
  • Exterior rated mesh fabrics utilized.
  • System can withstand wind speeds up to 38 mph (61 kph).
  • Well-engineered architectural appearance compared to competitive systems.
  • Product designed for exterior or interior use.

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label
 

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)