Product Specs
-
Available in sizes up to 8' wide x 12' high (244 cm x 366 cm), depending on fabric selection.
-
Precision engineered and custom built for each opening to eliminate light gap.
-
Fabric Retention System only available with SB9000 and SB9100 fabric.
-
Includes aluminum headbox, (recess or surface mount) side-and-sill channels.
-
Hardware Finish Choices: clear anodized (standard), black, white, ivory, or charcoal bronze.
-
Bi-directional clutch never needs adjustment, can be mounted either right or left.
-
Stainless steel (standard) chain hangs at side providing unobstructed view.
-
Crank operated option-handle can be permanently mounted (standard) or detachable; up to 6’ (183 cm) in length.
-
Clutch-operated products can be ANSI/WCMA A100.1 compliant for areas where small children are present. Details here.
-
Product designed for interior use.
ANSI/WCMA A100.1 Compliance
If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.
If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.
Compliant window shades will include:
- Pre-installed spring-loaded chain tension device with bead chain threaded through it
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included
If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.
Testing
The testing required by the WCMA for products to comply with safety standard A100.1 includes:
- UV stability testing - AATCC Test Method 16 for UV Stability
- Impact testing - ASTM D5420
- Bead chain durability testing
- Operation cycle testing - 3,000 cycles per the standard
Our spring loaded tension device passed the requirements of these tests.
WCMA compliant hangtag warning label
Supporting Documents
Click the 
and 
icons to navigate the folders. Click the document name to download.
Part Numbers
Related Motors & Accessories