IMPORTANT UPDATES FOR MANUAL ROLLER SHADES
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

SSI+ with Automated Glare Control

Product Description

The SSI+ with Automated Glare Control utilizes onboard buttons and LCD display for simple configuration of up to eight automated glare control zones. Built-in features integrate up to four sensors—by third-party or Draper—to an IntelliFlex I/O network. Provides support for up to eight scheduled override events that can be configured to run on any combination of days of the week. External power input for sensors provide support for any sensor power requirements.

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

Dimensions: 4-7/8” x 3” x 1” (124 mm x 76 mm x 25mm).

Supports 0-10V, 4-20mA, photodiode, and pulse sensors.

Eight automated glare control zones.

Eight scheduled events.

NDC required (included).

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.