IMPORTANT UPDATES FOR MANUAL ROLLER SHADES
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

Interior Cable Guide Assembly Kit

Product Description

By controlling the up and down movement of the hem bar, the Interior Cable Guide Assembly Kit helps keep the window shade aligned correctly within the opening. The cable is cut to length in the field.

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

Add-on kit can be used with the following products: Clutch-Operated FlexShade, Clutch-Operated FlexShade NEXD, Motorized FlexShade (including coupled shades), and FlexShade 2.

Add-on kit can be used with the Clutch-Operated FlexShade (including coupled shades).

Kit utilizes a 5/8” round bar in a 1-5/8” open-ended hem pocket.

Kit utilizes a 5/8” (16 mm) round bar in a 1-5/8” (41 mm) open-ended hem pocket.

Kit includes all options for wall-mount, deck-mount, brackets only, and fascia mounting.

Kit includes all options for wall-mount, deck-mount, brackets only, and fascia mounting.

Contact Draper for information regarding use on a sloped façade.

Contact Draper for information regarding use on a sloped façade.

For interior use only.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.