IMPORTANT UPDATES FOR MANUAL ROLLER SHADES
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

IntelliFlex GC4 Controller

Product Description

The IntelliFlex GC4 Controller reduces wiring by allowing the operation of up to four motors from a single control output as well as the ability to daisy chain multiple GC4s to create larger groups. The GC4 provides group control of these motors and all motors respond to the control output in the same way. Product is not suitable for applications where individual control of each motor is required. It comes with pluggable terminal blocks for easier wiring and is compatible with the 1MC, 4MC, or any line voltage double throw wall switch.

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

Comes installed in an 8x8x4” box.

Input Voltage: 120V AC/60Hz.

Output Voltage: 120V AC/60Hz.

Max Output Current: 4.0 Amps per motor.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.