IMPORTANT UPDATES FOR MANUAL ROLLER SHADES
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

Wall Clip with Tile Lip

Product Description

In existing recessed pockets, the Wall Clip with Tile Lip provides an attachment point for the closure panel and allows it to drop neatly into place without fasteners. It comes with a tile lip for acoustical ceiling support. There is a minimal slot through which the shade descends.

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

Extrusion comes in 12’ 3" (374 cm) long sections and must be cut to fit the space available. Draper can also cut to size.

Extrusion comes in 12’ 3" long sections and must be cut to fit the space available. Draper can also cut to size.

Tile support lip dimension is 7/8".

Compatible with 1-1/2” (38 mm), 3” (76 mm), and 5” (127 mm) closures.

Tile support lip dimension is 7/8" (22 mm).

Tile support lip dimension is 7/8".

Closures for Type D Pockets or Wall Clip.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.