IMPORTANT UPDATES FOR MANUAL ROLLER SHADES
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

Dual Roller Manual FlexShade

Product Description

Vertically stack a shade and projection screen or two window shades in a single headbox with the Dual Roller Manual FlexShade. The Dual Roller Manual FlexShade provides versatility in design applications making it useful in a variety of settings.

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

If this product is installed in a residence or other environment where it's likely that young children will be present, it must comply with ANSI/WCMA A100.1 for safety reasons. Request compliance at the time of the order, and we will supply a pre-installed Spring-Loaded Chain Tension Device. Details here.

If this product is installed in a residence or other environment where it's likely that young children will be present, it must comply with ANSI/WCMA A100.1 for safety reasons. Request compliance at the time of the order, and we will supply a pre-installed Spring-Loaded Chain Tension Device. Details here.

Maximum width is 8', depending on fabric selection.

The Clutch-Operated FlexShade NEXD is also available as a standard vertically stacked dual roller or as a horizontal dual roller.

Hardware components include: Dual Roller Endcaps, Dual Roller Fascia, Dual Roller Ceiling/Wall Headbox, and Dual Roller Pocket Headbox. Options may vary by product type. See technical documents for details.

Choose from a wide range of fabric colors, textures, and opacities.

Customize with graphics, patterns, or custom color match.

Dual Roller Fascia and Dual Roller Ceiling/Wall Headbox finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.

Dual Roller Extruded Aluminum Headbox available for wider widths. Three-piece headbox can be ordered assembled or broken down.

Dual Roller Pocket Headbox finish choices: gray inside/white outside or white inside/gray outside with a white wall clip.

Product designed for interior use.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.