Product Specs
-
Standard headbox: 5-¾" (15 cm) wide x 7-¾” (20 cm) high for manual and motorized shades. Headbox will be bent steel or three-piece extruded aluminum. Dual Roller Endcaps used for mounting shade.
-
Large headbox: 6-½” (17 cm) wide x 8-½” high (22 cm) for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Ceiling brackets are used for this size.
-
Extra-large headbox: 8-22/32" wide x 7-3/4" high for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Dual Roller Endcaps are used for mounting shade.
-
Suspended or flush mounting available.
-
Dual Roller Pocket headbox is white (standard) or grey where visible at the ceiling line. Available with or without tile lip.
-
Accommodates: Motorized FlexShade, Clutch FlexShade, Battery Powered FlexShade, 24V FlexShade, and LightBloc w/Side Channels.
-
Shades may be coupled, minimizing wiring and motor use (not suitable with LightBloc).
-
Product designed for interior use.
ANSI/WCMA A100.1 Compliance
If clutch-operated roller shades are installed in an environment where it's possible
that young children will be present, they should comply with ANSI/WCMA
A100.1, the Standard for Safety of Window Coverings.
If the shades that you purchase need to comply with this standard, it is your
responsibility to inform Draper and opt-in to receive compliant products at time of
order.
Spring-Loaded Cord Tension Device
Compliant window shades will include:
- Pre-installed spring-loaded chain tension device with bead chain threaded
through it
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included
If the tension device is not installed properly, or becomes unattached from the
mounting surface, the shade will be rendered partially inoperable. If installed
properly, the tension device will prevent the creation of a hazardous loop and
will maintain tension on the bead chain. The tension device and label require
tools to be removed.
Testing
The testing required by the WCMA for products to comply with safety standard
A100.1 includes:
- UV stability testing - AATCC Test Method 16 for UV Stability
- Impact testing - ASTM D5420
- Bead chain durability testing
- Operation cycle testing - 3,000 cycles per the standard
Our spring loaded tension device passed the requirements of these tests.
WCMA compliant hangtag warning label
Supporting Documents
Click the
and
icons to navigate the folders. Click the document name to download.
Part Numbers
-
C177.249SA - Dual Roller Pocket Headbox, Manual Shades
-
C177.248SA - Dual Roller Pocket Headbox, Standard Motorized
-
C177.250SA - Dual Roller Pocket Headbox, Large Motorized
-
- Contact Draper for details
Related Motors & Accessories