s_onro Daylighting Shutter System

Product Description

Exterior roller shutter system, s_onro features aluminum slats designed to provide privacy, yet still allow light and air into the room as needed. Aluminum slats offer a clean, modern look with an architectural feel. Retractable, the slats can be lowered for a louvered, light-filtering appearance. When the sun rises higher than 20 degrees, direct light is blocked providing automatic glare control. Lowered slats collapse into a solid, opaque wall for total privacy and light exclusion. Openness is controlled by stopping the descent of the screen. Bottom-up stacking eliminates spacing between slats providing privacy by closing the lower portion of the shades and leaving the top open to natural light.

Product Specs

  • Sizes available: minimum width of 24” (61cm), maximum width of 7’ 10” (239 cm), maximum drop of 9’ 10” (300 cm), and maximum area of 65 sq ft (6 sq m).
  • Available colors: white (RAL 9016), silver (RAL 9006), silver gray (RAL 9007), and anthracite (RAL 7016). For custom colors, contact Draper.
  • Two headbox styles available, square and round.
  • System incorporates extruded aluminum side guide channels and a sill angle.
  • System can be supplied with an integrated fly screen.
  • Wind resistance up to 56 mph (90 kph.)
  • Product designed for exterior use.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.


The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label

Supporting Documents

PDF document Catalog Page

View More CAD documents

Warranty Document

Warranty PDF Warranty

Part Numbers

Related Motors & Accessories

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

What could we improve? (required)
Please enter the following characters to help us prevent spam: