Draper will be closed November 26th and 27th in observance of the Thanksgiving holiday.
Drape‍r can deliver! Click here for updates.

FlexWave Light Shelf

Product Description

Balancing daylight and artificial light, the FlexWave Light Shelf significantly reduces the energy consumption needs of light fixtures in commercial and institutional applications. This horizontal shelf is placed above eye-level to reflect light onto the ceiling through a special wave design. The distribution of light reduces light spots, thus allowing a deeper penetration of glare-free natural light into the space.

Product Specs

  • Available in sizes up to 84" (213 cm) wide.
  • Product admissible for LEED point system, under “Indoor Environment Quality: Daylight & Views” category.
  • Proven to reduce the need for artificial lighting in buildings.
  • Proven to increase productivity, health, and reduction of employee absenteeism in classrooms and offices.
  • Lightweight, quick and easy to install.
  • Can be installed in single sections or continuous runs.
  • Light shelf bottom and cap available in: black, white, and silver.
  • Product is resistant to dust collection and easily rotates down for cleaning.
  • Product designed for interior use.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.


The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label

Part Numbers

Related Motors & Accessories

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

What could we improve? (required)
Please enter the following characters to help us prevent spam: