IMPORTANT UPDATES FOR MANUAL ROLLER SHADES
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

Skylight Motorized FlexShade

Product Description

Skylight Motorized FlexShade window shade provides indoor solar control and UV protection from overhead sunlight generated by an unprotected skylight. Controlling solar heat gain and glare help keep indoor spaces cooler. It provides a more comfortable workspace environment, as well as protecting employees, furnishings, and assets.

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

Available in sizes up to 6' wide x 8' high (183 cm x 244 cm), depending on fabric selection.

Available in sizes up to 6' wide x 8' high, depending on fabric selection.

Install Skylight on any angle, with rollers level and parallel.

Maximum unsupported width of 36" (91 cm).

Units wider than 36” (91 cm) require vinyl-clad aircraft support cables.

Recess or surface mount install.

Standard AC, RTS (Radio Technology Somfy) AC, 485 AC, or IntelliFlex I/O AC Controls are available.

Battens included to ensure flattest surface possible.

Install Skylight on any angle, with rollers level and parallel.

Choose from a wide range of fabric colors, textures, and opacities.

Venting space between shade and glass recommended.

Perimeter support angles simplify installation.

Side flanges prevent direct light leaks.

Recessed or surface mount install.

Continuous cable provides self-adjusting equalization of tension.

Hardware finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.

Select mesh fabric for light filtration or SunBloc for opacity.

Available with Standard AC, RTS Radio Technology Somfy AC, 485 AC, or IntelliFlex I/O AC Controls.

Product designed for interior use.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.