Draper will be closed Monday, May 27th, for Memorial Day.
IMPORTANT UPDATES FOR MANUAL ROLLER SHADES
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

PowerConnect SDN 10 Motor Panel

Product Description

The PowerConnect SDN 10 Motor Power Panel features a Somfy Digital Network (SDN) bus distribution component used to add 10 isolated motor ports and two isolated device ports to an SDN bus segment. The isolated motor ports support up to 240 feet of power and data wiring to a range of low-voltage Somfy SDN motors. For simplified installation, the in-wall or on-wall mountable enclosure provides easily accessible line and low-voltage areas. Product can be used in small SDN systems with two control devices and 10 individual motors as a stand-alone solution, as well as scale for larger SDN or animeo IP systems.

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

Dimensions: Cover: 12" W x 12" H (305 mm x 305 mm). Enclosure: 12" W x 12" H x 4" D (305 mm x 305 mm).

Dimensions: Cover: 12" W x 12" H. Enclosure: 12" W x 12" H x 4" D.

Enables control of 10 RS485 DC motors per panel.

Adds 10 isolated motor ports and 2 isolated device ports to a system.

Each device port supports 1 device, up to 8 power units.

Each device port supports 1 device, up to 8 power units.

Can mount on-wall or in-wall between studs.

Maximum 200 ft. per isolated device port.

Protects system components from mis-wire.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.