IMPORTANT UPDATES FOR MANUAL ROLLER SHADES:
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

Z-Wave to RTS Interface (ZRTSI)

Product Description

The Z-Wave to RTS Interface (ZRTSI) connects Z-Wave systems to Somfy RTS motors by converting Z-Wave signals into RTS commands. It enhances network strength as a signal repeater and supports easy device management with Network Wide Inclusion (NWI). The ZRTSI controls up to 16 RTS channels through 1 base node and 16 virtual nodes and plugs into a standard 110V AC outlet.

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

Dimensions: 5.5” l x 2.75” w x 1.5” d (140 mm x 70 mm x 38 mm).

Dimensions: 5.5” l x 2.75” w x 1.5” d.

Features an LCD screen.

Comes with LCD screen.

Power Input: 120V AC 60Hz.

Power Input: 120V AC, 60Hz.

It is recommended to have one ZRTSI unit for every 25-to-35-foot area where RTS motors are installed.

One ZRTSI is recommended for each 25’ (8 m) to 35’ (11 m) area where RTS motors are present.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.