IMPORTANT UPDATES FOR MANUAL ROLLER SHADES:
Click here to learn about the new ANSI/WCMA 100.1-2022 child safety standard.

Dual Roller Pocket Headbox

Product Description

Maximize project space with the Dual Roller Pocket Headbox, by vertically stacking two shades or a shade and projection screen inside a single recessed headbox. Installation of the headbox can be done during the construction phase, saving shade roller set-up for a later date.

Hardware Options

Fabric Options

Large Format Printing

Ready to purchase

Product Specs

Standard headbox: 5-¾" (15 cm) wide x 7-¾” (20 cm) high for manual and motorized shades. Headbox will be bent steel or three-piece extruded aluminum. Dual Roller Endcaps used for mounting shade.

Standard headbox: 5-¾” wide x 7-¾” high for manual and motorized shades. Bent steel headbox or three-piece extruded aluminum. Dual Roller Endcaps used for mounting shade.

Large headbox: 6-½” wide x 8-½” high for manual and motorized shades. Bent steel headbox with or without tile lip. Ceiling brackets are used for this size.

Large headbox: 6-½” (17 cm) wide x 8-½” high (22 cm) for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Ceiling brackets are used for this size.

Extra-large headbox: 8-22/32" wide x 7-3/4" high for manual and motorized shades. Headbox constructed of bent steel and can be supplied with or without tile lip. Dual Roller Endcaps are used for mounting shade.

Extra-large headbox: 8-22/32" wide x 7-3/4" high for manual and motorized shades. Bent steel headbox with or without tile lip. Dual Roller Endcaps are used for mounting shade.

Suspended or flush mounting available.

Suspended or flush mounting available.

Dual Roller Pocket headbox is white (standard) or grey where visible at the ceiling line. Available with or without tile lip.

Accommodates: Motorized FlexShade, Clutch FlexShade, Battery Powered FlexShade, and 24V FlexShade.

Shades may be coupled, minimizing motors and wiring.

Accommodates: Motorized FlexShade, Clutch FlexShade, Battery Powered FlexShade, 24V FlexShade, and LightBloc w/Side Channels.

Shades may be coupled, minimizing wiring and motor use (not suitable with LightBloc).

Product designed for interior use.

ANSI/WCMA A100.1 Compliance

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

Pre-installed spring-loaded chain tension device with bead chain threaded through it
Approved permanent warning label attached
Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.