Motorized FlexShade® RTS AC

The Motorized FlexShade® RTS AC window shade offers a 3-wire motor that features parallel wiring, electronic programmable limits, and a multitude of control options. With a hand-held remote control and Plug & Play options, this easily programmable shade is the ideal choice for the office, boardroom, small commercial settings, residential, and church applications.
  • Available in sizes from 29-1/2" to 168" (75 cm to 427 cm) wide, depending on fabric selection. Larger sizes available with FlexShade 2 or Colossal FlexShade.
  • Shades can be coupled to reduce the number of motors required.
  • Secure moisture resistant connection to line voltage using M12 Connector or Plug & Play option using three-prong NEMA plug.
  • Motors can be parallel wired (daisy chained).
  • Optional sun sensor or timer with on-screen display.
  • Wireless wall switches available in 1, 2, 3, 4, or 5 channels. Handheld remotes are available in 1, 4, or 16 channels.
  • Serial and dry contact interfaces available.
  • Optional App control is available.
  • Multiple hardware options for surface mounting, including brackets (standard), fascia with endcaps, or headbox with closure.
  • Recess mount hardware includes pocket headbox or Pocket D headbox with tile lip. Where a pocket already exists a wall clip and closure are available with or without a tile lip.
  • Hardware finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
  • Compatible with U, H, and L channels for light-gap reduction.
  • Optional dual rollers available upon request.
  • Dual roller hardware components include: Dual Roller Endcaps, Dual Roller Fascia, and Dual Roller Pocket Headbox. Options may vary by product type. See technical documents for details.
  • Dual Roller Fascia finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
  • Dual Roller Pocket Headbox finish choices: gray inside/white outside or white inside/gray outside with a white wall clip.
  • Product designed for interior use.

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label
 

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)