ClearSound Grey Weave XH600E

The ClearSound family features premium acoustically-transparent viewing surfaces. Available with standard or microscopic perforations and fine-weave acoustically-transparent fabrics that allow sound to travel through the fabric. This ensures the highest quality experience in audio visual applications by providing a cinematic experience. The combination of self-supporting and tensioned surfaces means that almost any Draper projection screen model can be provided with a ClearSound viewing surface.

Overview


    Offers the acoustical properties of ClearSound White Weave XT900E, while providing the best optical qualities of both matt white and contrast grey screen fabrics. Provides vivid color contrast over a full 180° viewing cone. Flame and mildew resistant. Not recommended for use in sizes less than 80” wide. Not recommended for viewing less than 10' from screen.

Video - How to Use Draper's Improved Projection Planner>

White Papers

Surface Performance in Ambient Light

Projection Screen Surface Performance in Ambient Light

Download (PDF)

Request Hard Copy

ISF certificaiton

What ISF Certification of Viewing Surfaces Means

Download (PDF

Request Hard Copy

Acoustically Transparent Projection Screens

Acoustically Transparent Projection Screens

Download (PDF)

Request Hard Copy

 

Care and Maintenance of Viewing Surfaces

Care and Maintenance of Viewing Surfaces

Care & Maintenance Instructions (pdf)

Viewing Surface Names

Each surface has a name that includes the characteristics it has. The following shows an example with definitions and examples of each area listed below.

Viewing Surface Key

X: Extra-wide. Half gain is greater than 60°

M: Moderate. Half gain is 30-60°

C: Controlled. Half gain is less than 30°

T: Typical. Surfaces with "typical" contrast are white in color and are generally recommended for use where ambient light is controlled.

H: High. Surfaces with "high" contrast usually have a grey surface or substrate. Their black retention is enhanced and they perform well under reasonable levels of ambient light.

S: Superior. This designation is reserved for surfaces with remarkable contrast and resistance to ambient light. Our "superior" surfaces will meet or exceed the contrast offered by any competitive viewing surface.

The numeric portion of the name is its typical peak gain x 1000. Gain levels of surfaces cover the full range from 0.6 to 3.2, and minor variations may occur between the samples. Lower gain surfaces offer excellent uniformity across wide viewing cones, for excellent edge blending and consistent reproduction with short throw projectors. Higher gain surfaces offer a more brilliant display in a variety of settings.

* Gain is a measure of reflected or transmitted brightness as compared to a block of magnesium carbonate, which serves as the industry's standard for gain of 1.0. A more familiar "real-world" comparison is with a matt white projection screen. Most matt white screens have a fairly uniform light distribution pattern with gain of approximately 1.0. Screens that appear brighter on axis are concentrating reflected light in a narrower area: the gain may be 2.5 on axis but 0.5 at 60° to the side.

Some viewing surface codes include an E or V suffix after the gain number.

E: Indicates a self-supporting viewing surface that is part of the OptiView family and/or suitable for Draper Series E non-tensioned screen models.

V: Indicates the surface is part of our OptiFlex family of tensioned surfaces and/or suitable for Draper Series V tensioned screen models.


Supporting Documents

PDF document ClearSound_Grey_Weave_XH600E.pdf

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)