220 Volt Controls for Electric Screens

Choose from one of the following:

View All Controls High Voltage Controls Low Voltage Controls Built-in Low Voltage Controls Access MultiView Controls 220 Volt Controls

Euro Switch

Euro Switch

Part number: 121077

White surface mounted, single station wall switch (220V only).

U.S. Retail Price $58


Low Voltage Control with 2 Switches LVC-IV, 2 LVC-S

Low Voltage Control with 2 Switches LVC-IV, 2 LVC-S

Part number: 121239

Kit contains one (1) LVC-IV control Module and two (2) LVC-S low voltage switches. The LVC-IV low voltage control is used to control one 115V/220V motor by a third party system in a variety of ways:
  • Low voltage wall switch
  • "dry" contact closure
  • RF (radio frequency)
  • IR (infrared)
  • Serial Communication
  • low voltage relay (3v-28v)

Works with LVC-S, WRT, IRT/R, SP-KSM, Aux. "dry" contacts and KS-1 Power Supply Switch. The LVC-IV is housed in a single box, 3-compartment and UL Listed. Two low voltage switches (LVC-S) are included. The module contains a 3-screw terminal block for a low voltage wall switch, an IR receiver jack, a built-in RF receiver, two-RJ25 ports for RS232/RS485, a low voltage relay port with cable and a user-serviceable 3.5 A fuse.

The LVC-IV (module only) may be built into Access (Access Fit, Standard Access and Access XL) V & E, Signature V & E, Ultimate Access V & E, Silhouette V & E, Premier, Targa and Envoy. Factory installed controls will increase the length of the case in the Premier and Targa. Call for exact case length if this dimension is critical.

U.S. Retail Price $298

  110V Tech Data Sheet PDF document
  Dry Contact Wall Switch Wiring Instructions PDF document
  IR Remote Control Wiring PDF document
  Low Voltage Controls Wiring Instructions PDF document
  Low Voltage Controls Wiring Instructions (230V) PDF document
  LVC IV 110V Tech Data Sheet PDF document
  LVC IV 220V Tech Data Sheet PDF document
  RF Remote Control Wiring PDF document

LVC-IV & LVC-S

LVC-IV & LVC-S

Part number: 121229

Kit contains one (1) LVC-IV control Module and one (1) LVC-S low voltage switch. The LVC-IV low voltage control is used to control one 115V motor by a third party system in a variety of ways
  • Low voltage wall switch
  • "dry" contact closure
  • RF (radio frequency)
  • IR (infrared)
  • Serial Communication
  • low voltage relay (3v-28v)

Works with LVC-S, WRT, IRT/R, SP-KSM, Aux. "dry" contacts and KS-1 Power Supply Switch.

The LVC-IV is housed in a single box, 3-compartment and UL Listed. A low voltage switch (LVC-S) is included. The module contains:

  • a 3-screw terminal block for a low voltage wall switch
  • an IR receiver jack
  • a built-in RF receiver
  • two-RJ25 ports for RS232/RS485
  • a low voltage relay port with cable
  • user-serviceable 3.5 A fuse

The LVC-IV (module only) may be built into Access (Access Fit, Standard Access and Access XL) V & E, Signature V & E, Ultimate Access V & E, Silhouette V & E, Premier, Targa and Envoy. Factory installed controls will increase the length of the case in the Premier and Targa. Call for exact case length if this dimension is critical.

U.S. Retail Price $257

  110V Tech Data Sheet PDF document
  Dry Contact Wall Switch Wiring Instructions PDF document
  IR Remote Control Wiring PDF document
  Low Voltage Controls Wiring Instructions PDF document
  Low Voltage Controls Wiring Instructions (230V) PDF document
  LVC IV 110V Tech Data Sheet PDF document
  LVC IV 220V Tech Data Sheet PDF document
  RF Remote Control Wiring PDF document

VIC-12 (Video Interface Control)

VIC-12 (Video Interface Control)

Part number: 121055

Allows screen to be controlled by projector switch. When the projector comes on, the screen descends automatically. The VIC-12 interfaces screen operation with a video projector or tuner featuring a 12V switched outlet.

The VIC may be built into Access V & E. Factory installed controls will increase the length of the case. Call for exact case length as this dimension is critical.

The VIC-12 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with an LVC-IV, built-in or otherwise.

U.S. Retail Price $137

  Tech Data Sheet PDF document

VIC-6 (Video Interface Control)

VIC-6 (Video Interface Control)

Part number: 121054

Allows screen to be controlled by projector switch. When the projector comes on, the screen descends automatically. Model VIC-6 interfaces screen operation with a video projector or tuner featuring a 6V switched outlet. The VIC may be built into Access V & E. Factory installed controls will increase the length of the case. Call for exact case length is this dimension is critical.

The VIC-6 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with an LVC-IV, built-in or otherwise.

U.S. Retail Price $137

  Tech Data Sheet - 220V PDF document


Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)