|
121001
SS-1R
The SS-1R is a standard control included with most Draper electrically operated lifts. Comes standard as a silver plate with a black switch (also available in white). It is a 3-position rocker switch. Switch operation is sustained contact. Complete with single-gang cover plate. UL listed. 115V current. Also available in 220V (Part No: 121077).
110 V
|
|
|
121222
LVC-IV (Low Voltage Control Module)
110 V
|
|
|
121230
LVC-IV (Low Voltage Control Module)
220 V
|
|
|
121229
LVC-IV & LVC-S
The LVC-IV and LVC-S is for single station low voltage control. The LVC-IV is used to control one 115V motor in one of three ways: Low voltage wall switch/dry contact, RF (radio frequency) or IR (infrared). Works with LVC-S, LVC-SL LED, WRT/R, IRT/R, SP-KSM, Aux. "dry" contacts and KS-1 Power Supply Switch.
220 V
|
|
|
121223
LVC-IV & LVC-S
The LVC-IV and LVC-S is for single station low voltage control. The LVC-IV is used to control one 115V motor in one of three ways: Low voltage wall switch/dry contact, RF (radio frequency) or IR (infrared). Works with LVC-S, LVC-SL LED, WRT/R, IRT/R, SP-KSM, Aux. "dry" contacts and KS-1 Power Supply Switch.
110 V
|
|
|
121224
Low Voltage Control with 2 Switches LVC-IV, 2 LVC-S
110 V
|
|
|
121239
Low Voltage Control with 2 Switches LVC-IV, 2 LVC-S
220 V
|
|
|
121231
LVC-S
The Low Voltage Control Station is a 3-button control switch for use with the LVC-IV. It features three buttons for "up", "stop" and "down" control. Quick connect terminals on the back of the switch connect to the LVC-IV using your own 4-conductor wire.
220 V
|
|
|
121225
LVC-S
The Low Voltage Control Station is a 3-button control switch for use with the LVC-IV. It features three buttons for "up", "stop" and "down" control. Quick connect terminals on the back of the switch connect to the LVC-IV using your own 4-conductor wire.
110 V
|
|
|
121171
Low Voltage Wall Switch
110 V
|
|
|
121018
3-Position Key Control Switch KS-3
KS-3 3-position key control switch (up-off-down). Two cam-operated Single-Pole, Single-Throw contact blocks (On-Off), wired to emulate Single-Pole, Double-Throw, Center Off (On-Off-On). Maintained action. Similar to Draper's standard 3-position control switch, but requires a key for operation. Low voltage or 115v. Two keys furnished.
110 V
|
|
|
121017
KS-1
Useful with any control system for a Draper electrically operated projection screen, the KS-1 power supply switch mounts next to the operating switch and controls power to it. Single-Pole, Single-Throw (On-Off). Maintained action. Low voltage or 115V.
110 V
|
|
|
121019
SP-KPS-I
The SP-KPS-I Locking Switch Cover Plate features a 3-position control switch for limited access. Single-Pole, Double-Throw, Center off (On-Off-On). Maintained action. The cover plate and locking switch cover are brushed stainless steel. Two keys furnished. 115V.
110 V
|
|
|
121002
MS-3R/MS-4R
MS-3R and MS-4R are 2 station 115V controls that are similar in appearance to Single Station Control. Automatic override allows only one signal to reach the motor when switches are operated simultaneously. Single-Pole, Triple-Throw (On-On-On). Momentary (spring-loaded) action. 115V current. Also available in 220V.
110 V
|
|
|
121167
ILT RF Transmitter/Receiver
110 V
|
|
|
121169
ILT IR Transmitter/Receiver
110 V
|
|
|
121251
Lift IRT/R
The IRT/R is an Infrared (IR) transmitter and receiver. 3-button operation. Fully compatible with "learnable" IR master control systems. Receiver plugs into the Lift LV Control or DC Motor Control.
110 V
|
|
|
121250
Lift IRT
Infrared transmitter (IRT). Must be used with receiver and low voltage control module.
110 V
|
|
|
121022
SP-KSM
Need a keyed switch for security? The SP-KSM replaces the standard 3-position key switch (KS-3) where a spring-loaded action is required. It combines the directional functions (Up and Down) with the security of a key switch. Use for low voltage contact closure or multiple switching. This switch is necessary to access the service position of the scissor lifts.
110 V
|
|
|
121070
Lift L.V. Control
The Lift L.V. Control is used to control one 115V motor in one of three ways: Low voltage control station (wall switch/dry contact), RF remote (radio frequency) or IR remote (infrared). Works with Lift L.V. Control Station, Lift WRT/R, Lift IRT/R, SP-KSM, Aux. "dry" contacts, and KS-1 Power Supply Switch. Two double-gang electrical boxes are bolted together. One box contains the actual module, while the empty box is useful for making connections. The Lift L.V. Control (module only) is built into the Scissor Lift SL and SLX.
220 V
|
|
|
121071
Lift L.V. Control Station
The Lift L.V. Control Station (wall switch/dry contact) is a 3 position (UP, Stop, Down) switch mounted on white single gang panel that is used to control the Lift L.V. (Lift Low Voltage Control Module).
220 V
|
|
|
121079
Low Voltage Control with 2 Switches LVC-IV, 2 LVC-S
220 V
|
|
|
121232
LVC-S with Locking Cover
|
|
|
121085
MC1
The MC1 Control Board provides multiple input control options for screen, lift or shade motors. This simply designed, but powerful control board accepts 2-way serial communication (with or without relay closure), infrared commands via IR receiver, and relay closures found in home integration systems. Available as an external option for all motorized screens, Micro Projector Lift, LCD Lift and Aerolifts.
220 V
|
|
|
121090
IRT/R
110 V
|
|
|
121091
IRT/R
220 V
|
|
|
121087
LVC-S
220 V
|
|
|
121086
LVC-S
110 V
|
|
|
121092
MC1 & MC1-WRT/R
110 V
|
|
|
121093
MC1 & MC1-WRT/R
220 V
|
|
|
121099
MC1 Splitter
110 V
|
|
|
121099
MC1 Splitter
110 V
|
|
|
121005
Control Station MS-4R
Used with part number 121002 when more than 2 control stations are needed.
110 V
|
|
|
121024
VIC-12 (Video Interface Control)
Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically. The VIC-12 interfaces screen operation with a video projector or tuner featuring a 12V switched outlet. The VIC-12 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with a Lift LV Control, built-in or otherwise.
110 V
|
|
|
121055
VIC-12 (Video Interface Control)
Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically. The VIC-12 interfaces screen operation with a video projector or tuner featuring a 12V switched outlet. The VIC-12 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with a Lift LV Control, built-in or otherwise.
220 V
|
|
|
121025
VIC-6 (Video Interface Control)
110 V
|
|
|
121054
VIC-6 (Video Interface Control)
220 V
|
|
|
121023
VIC-OS
|
|
|
121041
VIC-115 (Video Interface Control)
Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically. Model VIC115 integrates screen operation with a Draper video projector lift, or a video projector or tuner with a 115V switched outlet.
The VIC-115 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with an LVC-III, built-in or otherwise.
220 V
|
|
|
121077
Euro Switch
220 V
|