Controls for Scissor Lift SL

Lift L.V. Control Station

121246 Lift L.V. Control Station

The Lift L.V. Control Station (wall switch/dry contact) is a 3 position (UP, Stop, Down) switch mounted on white single gang panel that is used to control the Lift L.V. (Lift Low Voltage Control Module). 110 V
Tech Data Sheet PDF document

R2D7 for RS232 Serial Control

C156.066 R2D7 for RS232 Serial Control

The serial bridge allows third party control of our low voltage control via serial RS-232 ASCII commands.
Instructions PDF document

Serial Port Adapter (9 pin to RJ11)

C103.042 Serial Port Adapter (9 pin to RJ11)

Converts a standard DB9 serial output of a PC into an RJ11 connection providing RS232 serial commands.

Lift WRT/R

121249 Lift WRT/R

Hand-held radio frequency transmitter (WRT). 3-button control lets you stop or change direction at any point. Requires The WRT/R is a hand-held RF transmitter/receiver. 3-button control. The RF receiver plugs into the Lift LV Control, DC Motor Control.receiver and Draper low voltage control unit. 110 V
Tech Data Sheet PDF document

Lift WRT

121248 Lift WRT

Hand-held radio frequency transmitter (WRT). 3-button control lets you stop or change direction at any point. Requires receiver and Draper low voltage control unit. 110 V
Tech Data Sheet PDF document

Lift L.V. Control Station 220V

121247 Lift L.V. Control Station 220V

The Low Voltage Control Station is a 3-button control switch for use with the Lift LV Control. It features three buttons for "up", "stop" and "down" control. 220V 220 V

SP-KSM

121022 SP-KSM

Need a keyed switch for security? The SP-KSM replaces the standard 3-position key switch (KS-3) where a spring-loaded action is required. It combines the directional functions (Up and Down) with the security of a key switch. Use for low voltage contact closure or multiple switching. This switch is necessary to access the service position of the scissor lifts.
SPKSM Technical Data Sheet PDF document
Tech Data Sheet PDF document

VIC-12 (Video Interface Control)

121024 VIC-12 (Video Interface Control)

Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically. The VIC-12 interfaces screen operation with a video projector or tuner featuring a 12V switched outlet.

The VIC-12 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with a Lift LV Control, built-in or otherwise. 110 V

Tech Data Sheet PDF document

Lift IRT

121250 Lift IRT

Infrared transmitter (IRT). Must be used with receiver and low voltage control module. 110 V
Tech Data Sheet PDF document

Lift IRT/R

121251 Lift IRT/R

The IRT/R is an Infrared (IR) transmitter and receiver. 3-button operation. Fully compatible with "learnable" IR master control systems. Receiver plugs into the Lift LV Control or DC Motor Control. 110 V
Tech Data Sheet PDF document

KS-1

121017 KS-1

Useful with any control system for a Draper electrically operated projection screen, the KS-1 power supply switch mounts next to the operating switch and controls power to it. Single-Pole, Single-Throw (On-Off). Maintained action. Low voltage or 115V. 110 V
Tech Data Sheet PDF document

SP-KSM

121022 SP-KSM

Need a keyed switch for security? The SP-KSM replaces the standard 3-position key switch (KS-3) where a spring-loaded action is required. It combines the directional functions (Up and Down) with the security of a key switch. Use for low voltage contact closure or multiple switching. This switch is necessary to access the service position of the scissor lifts. 110 V
SPKSM Technical Data Sheet PDF document
Tech Data Sheet PDF document

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)