Controls for Micro Projector Lift

SS-1R

121001 SS-1R

The SS-1R is a standard control included with most Draper electrically operated lifts. Comes standard as a silver plate with a black switch (also available in white). It is a 3-position rocker switch. Switch operation is sustained contact. Complete with single-gang cover plate. UL listed. 115V current. Also available in 220V (Part No: 121077). 110 V
CE Tech Data Sheet PDF document
Tech Data Sheet PDF document

Wall Switch SS-1R (White)

121102 Wall Switch SS-1R (White)

White cover plate. 115 volt, single pole, double throw, with maintained operation. May be used with Draper electric screens and most projector lifts. 110 V
CE Tech Data Sheet PDF document
Tech Data Sheet PDF document

MS-3R/MS-4R

121002 MS-3R/MS-4R

MS-3R and MS-4R are 2 station 115V controls that are similar in appearance to Single Station Control. Automatic override allows only one signal to reach the motor when switches are operated simultaneously. Single-Pole, Triple-Throw (On-On-On). Momentary (spring-loaded) action. 115V current. Also available in 220V. 110 V
Tech Data Sheet PDF document

Control Station MS-4R

121005 Control Station MS-4R

Used with part number 121002 when more than 2 control stations are needed. 110 V

LVC-IV (Low Voltage Control Module)

121222 LVC-IV (Low Voltage Control Module)

110 V
110V Tech Data Sheet PDF document
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Dry Contact Wall Switch Wiring Instructions PDF document
IR Remote Control Wiring PDF document
Low Voltage Controls Wiring Instructions PDF document
Low Voltage Controls Wiring Instructions (230V) PDF document
LVC IV 110V Tech Data Sheet PDF document
LVC IV 220V Tech Data Sheet PDF document
RF Remote Control Wiring PDF document

LVC-IV (Low Voltage Control Module)

121230 LVC-IV (Low Voltage Control Module)

220 V
110V Tech Data Sheet PDF document
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Dry Contact Wall Switch Wiring Instructions PDF document
IR Remote Control Wiring PDF document
Low Voltage Controls Wiring Instructions PDF document
Low Voltage Controls Wiring Instructions (230V) PDF document
LVC IV 110V Tech Data Sheet PDF document
LVC IV 220V Tech Data Sheet PDF document
RF Remote Control Wiring PDF document

LVC-S

121231 LVC-S

The Low Voltage Control Station is a 3-button control switch for use with the LVC-IV. It features three buttons for "up", "stop" and "down" control. Quick connect terminals on the back of the switch connect to the LVC-IV using your own 4-conductor wire. 220 V
CAD (pdf) PDF document

LVC-S

121225 LVC-S

The Low Voltage Control Station is a 3-button control switch for use with the LVC-IV. It features three buttons for "up", "stop" and "down" control. Quick connect terminals on the back of the switch connect to the LVC-IV using your own 4-conductor wire. 110 V
CAD (pdf) PDF document

KS-1

121017 KS-1

Useful with any control system for a Draper electrically operated projection screen, the KS-1 power supply switch mounts next to the operating switch and controls power to it. Single-Pole, Single-Throw (On-Off). Maintained action. Low voltage or 115V. 110 V
Tech Data Sheet PDF document

3-Position Key Control Switch  KS-3

121018 3-Position Key Control Switch KS-3

KS-3 3-position key control switch (up-off-down). Two cam-operated Single-Pole, Single-Throw contact blocks (On-Off), wired to emulate Single-Pole, Double-Throw, Center Off (On-Off-On). Maintained action. Similar to Draper's standard 3-position control switch, but requires a key for operation. Low voltage or 115v. Two keys furnished. 110 V
Tech Data Sheet PDF document

SP-KSM

121022 SP-KSM

Need a keyed switch for security? The SP-KSM replaces the standard 3-position key switch (KS-3) where a spring-loaded action is required. It combines the directional functions (Up and Down) with the security of a key switch. Use for low voltage contact closure or multiple switching. This switch is necessary to access the service position of the scissor lifts. 110 V
SPKSM Technical Data Sheet PDF document
Tech Data Sheet PDF document

SP-KPS-I

121019 SP-KPS-I

The SP-KPS-I Locking Switch Cover Plate features a 3-position control switch for limited access. Single-Pole, Double-Throw, Center off (On-Off-On). Maintained action. The cover plate and locking switch cover are brushed stainless steel. Two keys furnished. 115V. 110 V
Tech Data Sheet PDF document

VIC-12 Kit (Video Interface Control)

121033 VIC-12 Kit (Video Interface Control)

Video Interface Control - a relay with a COM/NC/NO contacts, and a 12 V coil, housed in a metal box for the Revelation only. 110 V
Tech Data Sheet PDF document

R2D7 for RS232 Serial Control

C156.066 R2D7 for RS232 Serial Control

The serial bridge allows third party control of our low voltage control via serial RS-232 ASCII commands.
Instructions PDF document

Serial Port Adapter (9 pin to RJ11)

C103.042 Serial Port Adapter (9 pin to RJ11)

Converts a standard DB9 serial output of a PC into an RJ11 connection providing RS232 serial commands.

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)