Accessories for Scissor Lift SL

Lift L.V. Control

Lift L.V. Control

Part number: 121244

The Lift L.V. Control is used to control one 115V motor in one of three ways:
  • Low voltage control station (wall switch/dry contact)
  • RF remote (radio frequency)
  • IR remote (infrared)
    • Works with:

      • Lift L.V. Control Station
      • Lift WRT/R
      • Lift IRT/R
      • SP-KSM
      • Aux. "dry" contacts
      • KS-1 Power Supply Switch
        • . Two double-gang electrical boxes are bolted together. One box contains the actual module, while the empty box is useful for making connections. The Lift L.V. Control (module only) is built into the Scissor Lift SL and SLX.
          Serial & Network Wiring Guide PDF document
          Tech Data Sheet PDF document

Lift L.V. Control

Lift L.V. Control

Part number: 121244

The Lift L.V. Control is used to control one 115V motor in one of three ways:
  • Low voltage control station (wall switch/dry contact)
  • RF remote (radio frequency)
  • IR remote (infrared)
    • Works with:

      • Lift L.V. Control Station
      • Lift WRT/R
      • Lift IRT/R
      • SP-KSM
      • Aux. "dry" contacts
      • KS-1 Power Supply Switch
        • . Two double-gang electrical boxes are bolted together. One box contains the actual module, while the empty box is useful for making connections. The Lift L.V. Control (module only) is built into the Scissor Lift SL and SLX.
          Serial & Network Wiring Guide PDF document
          Tech Data Sheet PDF document

Lift L.V. Control

Lift L.V. Control

Part number: 121244

The Lift L.V. Control is used to control one 115V motor in one of three ways:
  • Low voltage control station (wall switch/dry contact)
  • RF remote (radio frequency)
  • IR remote (infrared)
    • Works with:

      • Lift L.V. Control Station
      • Lift WRT/R
      • Lift IRT/R
      • SP-KSM
      • Aux. "dry" contacts
      • KS-1 Power Supply Switch
        • . Two double-gang electrical boxes are bolted together. One box contains the actual module, while the empty box is useful for making connections. The Lift L.V. Control (module only) is built into the Scissor Lift SL and SLX.
          Serial & Network Wiring Guide PDF document
          Tech Data Sheet PDF document

Ceiling Access Door

Ceiling Access Door (Metal Finish)

Part number: 300007

Easy access for maintenance or repairs on projector lifts installed above-the-ceiling, the Ceiling Access Door features a white metal hinged door. The utilization of a hinged door provides easy entry to the lift. Maintenance or repairs can be done without causing damage to the ceiling.
Ceiling Access Door (dwg) AutoCAD document
Ceiling Access Door (pdf) PDF document

Ceiling Access Door (Ceiling Tile)

Ceiling Access Door (Ceiling Tile)

Part number: 300008

The Ceiling Access Door (Ceiling Tile) features a hinged door for above-the-ceiling access to Draper projector lifts. The utilization of a hinged door provides easy entry to the lift. Maintenance or repairs can be done without causing damage to the ceiling. Ceiling material can be added to blend in with the surrounding area providing a more discreet overall design.
Ceiling Tile Access Door (dwg) AutoCAD document
Ceiling Tile Access Door (pdf) PDF document

(SL) Ceiling Finish Kit

(SL) Ceiling Finish Kit (White)

Part number: 300286

The (SL) Ceiling Finish Kit includes a ceiling closure panel and ceiling trim ring to finish the opening in the ceiling around the lift and projector. The finish kit conceals the projector and lift when in the “up” position and can be used in non-plenum ceilings. It is not compatible when used with environmental airspace housing. Available in black and white. Fits in 2’ x 2’ (60 cm x 60 cm) ceiling grid. Maximum projector size is approximately 18-1/4" width x 21-13/16" length (46 cm x 55 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(SL) Ceiling Finish Kit

(SL) Ceiling Finish Kit (Black)

Part number: 300579

The (SL) Ceiling Finish Kit includes a ceiling closure panel and ceiling trim ring to finish the opening in the ceiling around the lift and projector. The finish kit conceals the projector and lift when in the “up” position and can be used in non-plenum ceilings. It is not compatible when used with environmental airspace housing. Available in black and white. Fits in 2’ x 2’ (60 cm x 60 cm) ceiling grid. Maximum projector size is approximately 18-1/4" width x 21-13/16" length (46 cm x 55 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(SL) Ceiling Closure Panel

(SL) Ceiling Closure Panel (White)

Part number: 300291

The (SL) Ceiling Closure Panel covers the opening in the ceiling when the lift and projector are in the "up" position. Ceiling material can be added to the panel to blend in with the surrounding area for a more discreet overall design. The panel can be used by itself in non-plenum ceilings or with environmental airspace housing. Available in black or white. Fits in 2’ x 2’ (60 cm x 60 cm) grid ceiling. Maximum projector size is approximately 18-1/4" width x 21-13/16" length (46 cm x 55 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(SL) Environmental Airspace Housing

(SL) Environmental Airspace Housing (Black)

Part number: 300581

For use in a return air plenum, the (SL) Environmental Airspace Housing is a metal enclosure that isolates the projector and lift from the environmental airspace above the ceiling. The trim ring is available in white (standard) or black.
CAD (dwg) AutoCAD document
CAD (pdf) PDF document

(SL) Environmental Airspace Housing

(SL) Environmental Airspace Housing (White)

Part number: 300282

For use in a return air plenum, the (SL) Environmental Airspace Housing is a metal enclosure that isolates the projector and lift from the environmental airspace above the ceiling. The trim ring is available in white (standard) or black.
CAD (dwg) AutoCAD document
CAD (pdf) PDF document

(SL) Ceiling Closure Panel

(SL) Ceiling Closure Panel (Black)

Part number: 300580

The (SL) Ceiling Closure Panel covers the opening in the ceiling when the lift and projector are in the "up" position. Ceiling material can be added to the panel to blend in with the surrounding area for a more discreet overall design. The panel can be used by itself in non-plenum ceilings or with environmental airspace housing. Available in black or white. Fits in 2’ x 2’ (60 cm x 60 cm) grid ceiling. Maximum projector size is approximately 18-1/4" width x 21-13/16" length (46 cm x 55 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(B) Ceiling Finish Kit

(B) Ceiling Finish Kit (White)

Part number: 300284

The (B) Ceiling Finish Kit includes a ceiling closure panel and ceiling trim ring to finish the opening in the ceiling around the lift and projector. The finish kit conceals the projector and lift when in the “up” position and can be used in non-plenum ceilings. It is not compatible when used with environmental airspace housing. Available in black and white. Maximum projector size is approximately 28-1/16" width x 25-3/8" length (71 cm x 64 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(B) Ceiling Closure Panel

(B) Ceiling Closure Panel (White)

Part number: 300289

The (B) Ceiling Closure Panel covers the opening in the ceiling when the lift and projector are in the "up" position. Ceiling material can be added to the panel to blend in with the surrounding area for a more discreet overall design. The panel can be used by itself in non-plenum ceilings or with environmental airspace housing. Available in black or white. Maximum projector size is approximately 28-1/4" width x 25-3/8" length (71 cm x 64 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(B) Ceiling Closure Panel

(B) Ceiling Closure Panel (Black)

Part number: 300583

The (B) Ceiling Closure Panel covers the opening in the ceiling when the lift and projector are in the "up" position. Ceiling material can be added to the panel to blend in with the surrounding area for a more discreet overall design. The panel can be used by itself in non-plenum ceilings or with environmental airspace housing. Available in black or white. Maximum projector size is approximately 28-1/4" width x 25-3/8" length (71 cm x 64 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

AeroLift 100 Environmental Airspace Housing

AeroLift 100 Environmental Airspace Housing (White)

Part number: 300280

For use in a plenum ceiling, the AeroLift 100 Environmental Airspace Housing is a metal enclosure that isolates the projector and lift from the environmental airspace above the ceiling. The trim ring is available in white (standard) or black.
CAD (dwg) AutoCAD document
CAD (pdf) PDF document

AeroLift 100 Environmental Airspace Housing

AeroLift 100 Environmental Airspace Housing (Black)

Part number: 300584

For use in a plenum ceiling, the AeroLift 100 Environmental Airspace Housing is a metal enclosure that isolates the projector and lift from the environmental airspace above the ceiling. The trim ring is available in white (standard) or black.
CAD (dwg) AutoCAD document
CAD (pdf) PDF document

Ceiling Finish Kit

Ceiling Finish Kit (White)

Part number: 300285

The (E) Ceiling Finish Kit includes a ceiling closure panel and ceiling trim ring to finish the opening in the ceiling around the lift and projector. The finish kit conceals the projector and lift when in the “up” position and can be used in non-plenum ceilings. It is not compatible when used with environmental airspace housing. Available in black and white. Maximum projector size is approximately 25-1/8" width x 38-3/16" length (64 cm x 97 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

Scissor Lift Current Sensor

Scissor Lift Current Sensor

Part number: 300382

Optional current sensor for SL and SLX scissor lifts
CAD (dwg) 110 Volt
CAD (dwg) 220 Volt AutoCAD document
CAD (pdf) 110 Volt PDF document
CAD (pdf) 220 Volt PDF document

Scissor Lift Current Sensor

Scissor Lift Current Sensor

Part number: 300383

Optional current sensor for SL and SLX scissor lifts
CAD (dwg) 110 Volt
CAD (dwg) 220 Volt AutoCAD document
CAD (pdf) 110 Volt PDF document
CAD (pdf) 220 Volt PDF document

(E) Ceiling Closure Panel

(E) Ceiling Closure Panel (White)

Part number: 300290

The (E) Ceiling Closure Panel covers the opening in the ceiling when the lift and projector are in the "up" position. Ceiling material can be added to the panel to blend in with the surrounding area for a more discreet overall design. The panel can be used by itself in non-plenum ceilings or with environmental airspace housing. Available in black or white. Maximum projector size: 25-1/8” width x 38-3/16” length (64 cm x 97 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(E) Enviromental Airspace Housing

(E) Enviromental Airspace Housing (White)

Part number: 300281

For use in a return air plenum, the (E) Environmental Airspace Housing is a metal enclosure that isolates the projector and lift from the environmental airspace above the ceiling. The trim ring is available in white (standard) or black.
CAD (dwg) AutoCAD document
CAD (pdf) PDF document

(E) Enviromental Airspace Housing

(E) Enviromental Airspace Housing (Black)

Part number: 300587

For use in a return air plenum, the (E) Environmental Airspace Housing is a metal enclosure that isolates the projector and lift from the environmental airspace above the ceiling. The trim ring is available in white (standard) or black.
CAD (dwg) AutoCAD document
CAD (pdf) PDF document

(U) Ceiling Finish Kit

(U) Ceiling Finish Kit (White)

Part number: 300287

The (U) Ceiling Finish Kit includes a ceiling closure panel and ceiling trim ring to finish the opening in the ceiling around the lift and projector. The finish kit conceals the projector and lift when in the “up” position and can be used in non-plenum ceilings. It is not compatible when used with environmental airspace housing. Available in black and white. Maximum projector size is approximately 34-7/8" width x 26-1/8" length (96 cm x 66 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(U) Ceiling Finish Kit

(U) Ceiling Finish Kit (Black)

Part number: 300588

The (U) Ceiling Finish Kit includes a ceiling closure panel and ceiling trim ring to finish the opening in the ceiling around the lift and projector. The finish kit conceals the projector and lift when in the “up” position and can be used in non-plenum ceilings. It is not compatible when used with environmental airspace housing. Available in black and white. Maximum projector size is approximately 34-7/8" width x 26-1/8" length (96 cm x 66 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(U) Ceiling Closure Panel

(U) Ceiling Closure Panel (White)

Part number: 300292

The (U) Ceiling Closure Panel covers the opening in the ceiling when the lift and projector are in the "up" position. Ceiling material can be added to the panel to blend in with the surrounding area for a more discreet overall design. The panel can be used by itself in non-plenum ceilings or with environmental airspace housing. Available in black or white. Maximum projector size is approximately 34-7/8" width x 26-1/8" length (96 cm x 66 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(U) Ceiling Closure Panel

(U) Ceiling Closure Panel (Black)

Part number: 300589

The (U) Ceiling Closure Panel covers the opening in the ceiling when the lift and projector are in the "up" position. Ceiling material can be added to the panel to blend in with the surrounding area for a more discreet overall design. The panel can be used by itself in non-plenum ceilings or with environmental airspace housing. Available in black or white. Maximum projector size is approximately 34-7/8" width x 26-1/8" length (96 cm x 66 cm).
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

(U) Environmental Airspace Housing

(U) Environmental Airspace Housing (White)

Part number: 300283

For use in a return air plenum, the (U) Environmental Airspace Housing is a metal enclosure that isolates the projector and lift from the environmental airspace above the ceiling. The trim ring is available in white (standard) or black.
CAD (dwg) AutoCAD document
CAD (pdf) PDF document

(U) Environmental Airspace Housing

(U) Environmental Airspace Housing (Black)

Part number: 300590

For use in a return air plenum, the (U) Environmental Airspace Housing is a metal enclosure that isolates the projector and lift from the environmental airspace above the ceiling. The trim ring is available in white (standard) or black.
CAD (dwg) AutoCAD document
CAD (pdf) PDF document

Universal Projector Mount for Lifts

Universal Projector Mount for Lifts

Part number: 300212

Universal Projector Mount (for projectors up to 25 lbs. (11kg))
CAD (dwg) AutoCAD document
CAD (pdf) PDF document
Instructions PDF document

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)