Draper FlexShade Hardware

FlexShade® Coupler

Click image to enlarge.

Draper's FlexShade® Coupling System lets one motor or crank operator drive multiple window shade rollers. Reduce the number of motors required and you reduce the cost of the project and simplify the electrical portion of the contract. The FlexShade Coupler allows fabrics height to be easily and independently adjusted. MORE

Type D Pocket

Click image to enlarge.

Now Redesigned! Aluminum FlexShade® Pockets are for mounting motorized or manual FlexShades above the ceiling. Pockets are anchored through the top, and FlexShades are installed using standard ceiling brackets.

Pockets have a removable continuous closure that drops into place without fasteners. 1-1/2" (38mm) closure panel recommended for use with clutch-operated FlexShades. Larger closure panels will require field notching for bead chain clearance. Not suitable for all products/sizes.

• 12’ (367cm) length
• Cross-section measures 5" x 5-3/8" (13mm x 136mm)
• Standard color: white
• Fixed lip along lower edge supports lay-in ceiling at bottom edge
• For use with clutch-operated or motorized FlexShade, and with FlexShade Coupling Assembly.

Wall Clip

Click image to enlarge.

Pocket already exists? Specify FlexShade® Wall Clip with closure. Wall Clip mounts to the wall and bottom closure panel drops neatly into place without fasteners, leaving a minimal slot through which shade descends. Closure sizes 1-1/2" (38mm) or 3" (76mm) or 5" (127mm). Wall clip length 12’ (367cm)

Wall Clip with Tile Lip

Click image to enlarge.

Pocket already exists? Specify FlexShade Wall Clip with closure. Wall Clip mounts to the wall and bottom closure panel drops neatly into place without fasteners, leaving a minimal slot through which shade descends. Closure size 7/8" (22mm). Extension is 12’ (367cm) long.

Closures for Type D Pockets or Wall Clip

Click image to enlarge.

1-1/2" (38mm), 3" (76mm) or 5" (127mm) closure. 1-1/2" (38mm) recommended for use with clutch operated FlexShades. Larger closure panels will require field notching for chain clearance. 5" (127mm) for use with wall clip only.

Shade Panel Mounting Channel (Spline Attachment)

Click image to enlarge.

Shade fabric attached to channel with spline to create a free hanging fixed shade. Specify extrusion color.

Supporting Documents

CAD (pdf) PDF document
FlexShade Limited Warranty

Side "U" Channel, "H" Channel or "L" Angle

Click image to enlarge.

Side "U" Channels, "H" Channels or "L" Angles prevent direct light gaps at sides of shade fabrics.

  • U Channels are 1" (25mm) deep x 2-1/2" (64mm) wide, and mount to the jamb or face of window opening.
  • H Channels are 1" (25mm) deep x 5" (127mm) wide and are face mounted.
  • "L" Angles measure 1" x 3/4" (25mm x 19mm) or 1" x 2-3/4" (25mm x 70mm) and mount inside the jamb.

Fascia and Endcaps

Click image to enlarge.

Optional extruded fascia in square or radius styles hides hardware and roller. Available in clear anodized (standard), black, white, ivory, or charcoal bronze. 3-7/8" (98mm) or 4-5/8" (117mm) high as required. Color samples are available.

Supporting Documents

FlexShade Limited Warranty

Cable Guide Assembly Kits

Click image to enlarge.

Includes special hem bar with cable guides, wall or deck mount hardware, and 13’ (396cm) of steel cable. Cable cut to length in field.

Supporting Documents

FlexShade Limited Warranty

Fascia for Dual Roller FlexShade®

Click image to enlarge.

May be mounted inside or outside with matching endcaps. Is a secure fit, notchless and has a small profile. Accommodates manual FlexShades, Motorized FlexShades, Battery operated FlexShades and 24V FlexShades. Five colors: black, white, ivory, bronze or clear anodized, plus custom powder coat is available.

Mounting Brackets

Click image to enlarge.

The standard mounting hardware supplied for wall, ceiling or jamb installation of Draper Motorized and Manual FlexShades. As an option for a pair of 1-5/8" (41mm) brackets, white bracket covers are available. If optional fascia or headbox are specified, then endcaps (not brackets are supplied).

Pocket-Style Headbox

Click image to enlarge.

Complete extruded headbox with endcaps is available for ceiling recessed installation. In sizes 3-7/8" (98mm) high or 4-5/8" (112mm) high.

Ceiling/Wall Headbox

Click image to enlarge.

Complete extruded headbox is available to hide hardware and roller as an option for Motorized and Manual FlexShades. Two-piece assembly is suitable for surface mount to head, jamb or wall, in sizes 3-7/8" (98mm) high or 4-5/8" (117mm) high as required.

Standard Hem Bar - open end

Click image to enlarge.

1" elliptical slat inside of 1-5/8" heat-seamed pocket with open pocket ends. Plastic end caps on hem bar.

Supporting Documents

FlexShade Limited Warranty

Standard Hem Bar - sealed end

Click image to enlarge.

1" elliptical slat inside of a 1-5/8" pocket with heat sealed ends

Supporting Documents

FlexShade Limited Warranty

Exposed Hem Bar - Rectangular

Click image to enlarge.

1-1/2" X 5/16" (3.8 cm X .8 cm) Rectangular hem bar with plastic end caps. Colors: Black, bronze, ivory, white or clear anodized

Supporting Documents

FlexShade Limited Warranty

Exposed Hem Bar - Rectangular

Click image to enlarge.

7/8" X 5/16" (2.2 cm X .8 cm) Rectangular hem bar with plastic end caps. Colors: Black, bronze, ivory, white or clear anodized

Supporting Documents

FlexShade Limited Warranty

Exposed Hem Bar - Round

Click image to enlarge.

3/4" round Hembar with plastic end caps. Colors: Black, bronze, ivory, white or clear anodized.

Supporting Documents

FlexShade Limited Warranty