IntelliFlex® Control System Components

Individual Controls

Switch, Momentary DPDT Rocker, Ivory

Part Number: C112.026

Click image to enlarge.

The momentary rocker switch is an alternate to the maintained rocker. This switch must be held in place to keep from moving to the center/off position unlike the maintain switch which stays in position. The momentary switch comes in ivory and white. This switch is rated for 110-230V and 15A. This means that US and export markets can use the switch and the motor draw through the switch can be up to 12A. The switch fits in a single gang box and uses a princess rocker switch cover plate.

Supporting Documents

FlexShade Limited Warranty

Switch, Momentary DPDT Rocker, White

Part Number: C112.043

Click image to enlarge.

The momentary rocker switch is an alternate to the maintained rocker. This switch must be held in place to keep from moving to the center/off position unlike the maintain switch which stays in position. The momentary switch comes in ivory and white. This switch is rated for 110-230V and 15A. This means that US and export markets can use the switch and the motor draw through the switch can be up to 12A. The switch fits in a single gang box and uses a princess rocker switch cover plate.

Supporting Documents

FlexShade Limited Warranty

Switch, Key operated, SPDT (maintained)

Part Number: 121018

Click image to enlarge.

The KS-3 can replace the standard single-station control switch for shades when the directional functions (Up and Down) need to be combined with the security of a key switch. The KS-3 is intended as the sole control station, and cannot be used as a multiple station control. It can, however, be used with the KS-1 power supply key switch, although having two key switches is redundant. It is not intended for use with any other control.3-position key operator. Cover plate is stainless steel. Four 6" (152mm) wire leads: black, black, red and blue (2 commons, down and up). 2¾" x 4½" (70mm x 114mm) cover plate fits a single-gang box.

Supporting Documents

FlexShade Limited Warranty

Switch, Key operated, SPDT (momentary)

Part Number: 121022

Click image to enlarge.

The KS-3 can replace the standard single-station control switch for shades when the directional functions (Up and Down) need to be combined with the security of a key switch. The KS-3 is intended as the sole control station, and cannot be used as a multiple station control. It can, however, be used with the KS-1 power supply key switch, although having two key switches is redundant. It is not intended for use with any other control.3-position key operator. Cover plate is stainless steel. Four 6" (152mm) wire leads: black, black, red and blue (2 commons, down and up). 2¾" x 4½" (70mm x 114mm) cover plate fits a single-gang box.

Supporting Documents

FlexShade Limited Warranty

Switch, Maintained DPDT Rocker, White

Part Number: C112.002

Click image to enlarge.

The maintained rocker switch (DP/DT) can run two motors at the same time. It comes in ivory and white. There are two sets of relays on the back of the switch to wire each motor. The motors cannot be parallel wired to the switch.

Supporting Documents

FlexShade Limited Warranty

Switch, Maintained DPDT Rocker, Ivory

Part Number: C112.012

Click image to enlarge.

The maintained rocker switch (DP/DT) can run two motors at the same time. It comes in ivory and white. There are two sets of relays on the back of the switch to wire each motor. The motors cannot be parallel wired to the switch.

Supporting Documents

FlexShade Limited Warranty

Switch, Maintained SPDT Toggle, Ivory

Part Number: 121101

Click image to enlarge.

The maintain toggle switch (SP/DT) is the standard switch which is sent with shades. Maintain switches when flipped stay in the up or down position for one to walk away while the shade moves. Ivory is the standard color, but white is also available. This switch is rated for 110-230V and 15A. This means that US and export markets can use the switch and the motor draw through the switch can be up to 12A. The switch fits in a single gang box and uses a conventional light switch cover plate.

Supporting Documents

FlexShade Limited Warranty

Switch, Maintained SPDT Toggle, White

Part Number: 121102

Click image to enlarge.

The maintain toggle switch (SP/DT) is the standard switch which is sent with shades. Maintain switches when flipped stay in the up or down position for one to walk away while the shade moves. Ivory is the standard color, but white is also available. This switch is rated for 110-230V and 15A. This means that US and export markets can use the switch and the motor draw through the switch can be up to 12A. The switch fits in a single gang box and uses a conventional light switch cover plate.

Supporting Documents

FlexShade Limited Warranty

Switch, Momentary SPDT Toggle, Ivory

Part Number: 121103

Click image to enlarge.

Supporting Documents

FlexShade Limited Warranty

Switch, Momentary SPDT Toggle, White

Part Number: 121104

Click image to enlarge.

Supporting Documents

FlexShade Limited Warranty

Extra Key for Light Duty Indoor Key Switch

Part Number: C064.020

Click image to enlarge.

Supporting Documents

FlexShade Limited Warranty