| |
|
|
|
|
|
|
You
can choose how you want to control your IntelliFlex® system:
 Wall
SwitchesPCInternetInfrared
RemoteRadio
Frequency RemoteOther |
|
|
|
|
|
|
|
Wall Switches
|
control
|
|
Dry Contact
Wall Switch
Clearly marked
for intended function. Site-specific overlay may be provided.
Unlike competitors' product, only one button must be activated
per function. This input device can be used with the SC1, SGC4
or SPGC4.
Fully Programmable
BUS Interface Wall Switch
Switch
is clearly marked for intended function. Site-specific overlay
may be provided. Unlike competitors' product, only one button
must be activated per function. Switch is capable of being reprogrammed
to allow for various control scenarios. Switch may act as a
group switch, an individual motor switch or any combination
thereof. This input device can be used with SC1, SGC4 or SPGC4.
Fully Programmable RF Wall Switch
Same as above, but RF. This input device
can be used with SC1, SGC4 or SPGC4. |
|
control
and program |
|
Wall Mountable
Keypad (24, 12 or 6 channel units)
Only
one button must be activated for each function. Keypad may act
as a group control, an individual motor control or any combination
thereof. This input device can be used with SC1, SGC4 or SPGC4. |
Personal
Computer
|
control
and program |
|
Personal
Computer
You can control and program your IntelliFlex® system from any
PC. Contact your Draper representative to obtain and discuss
the use of the programming software.
Download
software for your PC or
lap top to control your
IntelliFlex® system
|
|
| |
|
RS232
Professional Integration Interface ()
Acts
as additional BUS system input device allowing a facilities
manager to send override commands to shade motors at any
time to position shades appropriately for maximum utility
and efficiency. Includes free "GUI" software
capable of scheduling timed events and global alignment
positioning of shades. Can be used with SC1, GC4, SGC4
or SPGC4. Also shown is Serial Port Adapter that converts
a standard serial output of a PC into an RJ11 connection
providing RS232 commands. |
|
 |
|
|
|
|
|
| |
|
|
|
|
|
Internet
|
control
|
|
Internet
IP capability commands shades
from anywhere in the world. |
Radio Frequency Remote Control
|
control |
|
RF Remote Control
Transmitter—4 Channel
Four
channel RF transmitter. This input device can be used with SC1,
SGC4 or SPGC4. You must also select an RF Receiver. |
|
control
and program |
|
6,
12 and 24 Channel Combination RF/IR Remote Control Transmitter
The transmitter is clearly marked for intended function, and
shall send signals simultaneously via RF and IR.
Only one button must be activated for each function. May act
as a group control, an individual motor control or any combination
thereof. This input device can be used with SC1, SGC4 or SPGC4.
You must also select an IR Eye or RF Receiver. |
 |
|
Z-Wave Motor Contollers
Z-Wave is an open wireless control system designed for home and light commercial applications. It allows users to create a wireless, 2-way mesh network, and provides control of a large number of compatible devices (lights, alarm system, projection screen, window shades, etc.) from a single remote control, wall pad, or internet interface.
The Z-Wave Motor Control is an AC motor control compatible with our window shade and projection screen motors. Allows for bidirectional RF communications with other Z-Wave products. Total switched load of up to 8 amps. Power cord required. One motor control per motor. Motor control will work with any Z-Wave input device. (Z-Wave Input Devices – Can be purchased from Draper, but these and other Z-wave devices are also available at home improvement stores.) |
|
| |
RF
Remote Control Receiver
Listens
for a unique security code from the transmitter. Each
receiver can learn up to 5 transmitter codes. Multiple
units can be installed on the BUS, extending the effective
range of an RF system. Can be set up to listen to commands
from a number of sources including: RF transmitters, RF
Key Pads, RF Transmitter modules .
One unit controls up to 60 motors. This input device can
be used with SC1, SGC4 or SPGC4. You must also select
an RF or combination IR/RF transmitter. |
|
 |
|
RF Long
Range Antenna
Replaces
standard antenna to increase transmitter operation distance
from receiver. |
|
 |
|
|
|
|
|
|
|
Infrared Remote Control
|
control
and program |
|
6, 12 and 24
channel IR Remote Control Transmitters
May
act as a group control, an individual motor control or any combination
thereof. This input device can be used with SC1, SGC4 or SPGC4.
You must also select an IR Eye. |
|
control
and program |
|
T60 LCD Universal
Wireless Remote
Transmitter is clearly marked for intended
function. Only one button must be activated for each function.
May act as a group control, an individual motor control or any
combination thereof. This input device can be used with SC1,
SGC4 or SPGC4. You must also select an IR Eye. T60 LCD Universal
Wireless Remote can also be used to program the system. |
|
| |
IR
Remote Control Eye on 6' Modular Cable
Tiny
IR eye designed to peek out from behind a surface. 72"
white modular cable provided. One eye connected to a Bus
allows control of up to 60 motors. Dimensions of black
part of eye: 1/4" x 1/4" x 1/4". This device
can be used with SC1, SGC4 or SPGC4. You must also select
an IR or combination IR/RF transmitter.
IR
Remote Control Eye on 2' Modular Cable
Same
as above, but the length of white modular cable is 24".
|
|
 |
|
|
| |
|
|
|
|
|
Other
|
control |
|
Sun Sensor
Automatically control individual shade
or groups of shades in response to the position of the sun or
wind. Can be used with SC1, SGC4 or SPGC4. |
|
 |
