DRAPER PRO PORTAL  -  LOGIN | DRAPERONLINE (WINDOW SHADES) LOGIN |
KEYWORD / PRODUCT NUMBER
MANUFACTURING INNOVATION SINCE 1902
Skip Navigation Links

Wrestling Mat Lifters

Store wrestling mats up off the floor with a Draper Mat Lifter. Three models: Single, Double or Sectional. Each Mat Lifter is consists of an I-beam frame, with all drive and lifting mechanisms enclosed in a sheet metal housing.

  • Stationary or traveling
  • Raise and lower Mat Lifters with a key switch control. Limit switches control the range of motion
  • Each Mat Lifter has a high efficient hollow bored helical, direct drive gear box and an instantly reversing motor, operating with the choice of 208, 230, 460 volts in 3 phases. Mat Lifter includes a 15 lb. fast acting safety brake
  • Each Mat Lifter includes an integrated motion alarm that automatically sounds when system is moving
  • Lifting drums are synchronized for even cable wrap
  • 2" outside diameter solid steel drive shaft with machined key-ways.
  • Lift cables are 5/16" diameter, 7 x 19 air craft cable rated at 1960 lbs. each with a minimum 5 to 1 safety factor
  • The load bar is connected to a 22 oz. per square yard vinyl fabric sling with heavy-duty straps and fasteners
  • Standard sling color is black; other colors are available
  • All slings are sized to accept up to a 40" diameter rolled mat to accomodated new light-weight style wrestling mats
  • Five year limited waranty

Single Mat Lifter

Part Number: 502060

Click image to enlarge.

All of the options listed above plus:

Unit weighs approximately 1,750 lbs. (794kg) (excluding mat)
Lifting and lowering speed is approximately 10 feet per minute.
Supports a standard 45’ x 45’ (1372cm x 1372cm) wrestling mat (weighing approximately 1 lb./sq. ft. (454g / 929 sq cm) with a 5-to-1 safety ratio.
Three 5-16", 7 x 19 lifting cables
Optional wall brackets and travel kits available
Installation Video

Double Mat Lifter

Part Number: 502061

Click image to enlarge.

All of the options listed above plus:

Unit weighs approximately 1750 lbs.(794kg) (excluding mat)
Lifting and lowering speed is approximately 10 feet per minute.
Supports two 42’ x 42’ (1280cm x 1280cm) wrestling mats (weighing approximately 1 lb./sq. ft. (454g / 929 sq cm) with a 5-to-1 safety ratio
Three 5-16", 7 x 19 lifting cables
Complete system independently tested to 17,500 lbs.
Optional wall brackets and travel kits available
Installation Video

Sectional Mat Lifter

Part Number: 502069

Click image to enlarge.

All of the options listed above plus:

Unit weighs approximately 950 lbs. (431kg) (excluding mat)
Lifting and lowering speed is approximately 10 feet per minute.
Supports three 15’ x 45’ (457cm x 1372cm) wrestling mats (weighing approximately 1 lb./sq. ft.(454g / 929 sq cm) with a 5-to-1 safety ratio.
Two 5-16", 7 x 19 lifting cables
Optional travel kits available
Installation Video

Optional Traveling Kits

Part Number:

Click image to enlarge.

Move your mat from wrestling area to adjoining storage area above the gym floor by installing a Traveling Kit. Mat travels at ceiling height, either end first or sideways, to the optimal position and then lowers to the floor.

Mat Lifter travel kit is driven by a 1/2 HP motor operating with the choice of 208-, 230- or 460-volts in 3-phase attached to a 60:1 ratio gear box with non-pneumatic wheel(s).
The End First Travel Kit has two 1-ton machined trolleys with festooning power cables.
Sideways Travel Kit has four half-ton machined trolleys with festooning power cables.
Motors, drive assembly and all control mechanisms are encased in a fireproof cover.

Supporting Documents