Continuing
Education

Motorized
Single motorized FlexShade in an extruded 12' aluminum pocket. Pockets can be spliced/linked to form other lengths. 
White extruded aluminum case can be installed in the ceiling quickly and easily during the "dirty" phase of the construction process. Eliminates job site damage.
Case mounts easily with 3/8" threaded rod anywhere along the length of case, with lag screws through top of case, or hanger wire in a grid ceiling. 
Internal roller brackets slide in a track, so they may be located wherever appropriate after the pocket is installed. 
Window Shade (motor-in-roller with attached shade fabric) can be popped into the case at a future date, and installs in seconds.
Draper's exclusive optional power connection allows for pre-wiring of the pocket at either end prior to window shade installation. This feature can eliminate the need for an electrician when the window shades arrive.
Bottom panel forms a slot for passage of window shade fabric, and is easily removed without tools for unobstructed access into the case for installation of the window shade. 
Controls for motorized FlexShades.
Motor Options for motorized FlexShades

Use optional IntelliFlex® control system, a total package, providing maximum user control of electrically operated window shades.
Bead Chain Clutch
Unlike competitive systems, Draper clutch never needs adjustment and can be mounted either on the right or left, as preferred.
Window shade stops when operating chain is released.
Standard stainless steel bead chain hangs at the side, leaving the view unobstructed.
Optional plastic chain in ivory, grey or black. (The optional chain hold-down is designed to keep children from getting tangled in the cord.) 
Preset up and down limit stops prevent shades from being raised or lowered too far.
Spring assist is optionally available.
U. S. Patents 6,421,175; 6,532,109; 6,816,308 and other patents pending.
Depending on fabric, maximum recommended height is 10'.
We can print graphics on your window shade!