|
|
| Single Station Control (SS-1R) |
|
|
The SS-1R is a standard control (silver plate, black switch) included with most Draper electrically operated screens (also available in white). 3-position
rocker switch. Switch operation is sustained
contact.
Complete with single-gang cover plate. UL listed. See below
for Access Sonata and Access MultiView switch information. 115V current. Also available in 220V.
| Multiple Station Controls (MS-3R / MS-4R) |
|
|
MS-3R and MS-4R are identical in appearance to Single Station
Control, above. Automatic override allows only one signal to
reach the motor when switches are operated simultaneously.
115V current. Also available in 220V. |
|
|
|
| |
|
|
 |
| Low Voltage Switch (LVC-S) |
|
|
The LVC-S features 3-button
switches, which are labeled "up", "down" and "stop".
No preset sequence—push any button for desired function.
Neutral decorator face plates for
flush wall mounting. Optional for all Draper motorized
screens, except Access Sonata.
Switch must be used with Low Voltage Control Unit. |
|
|
| |
|
|
 |
Low Voltage Switch with Locking Cover Plate (LVC-S) |
|
|
| Technical Data Sheet |
|
|
| The LVC-S with Locking Cover Plate is a 3-button (Up, Stop, Down) wall switch which controls a motor with a built-in low voltage controller or an MC1. The buttons are oval. The locking cover plate is metal, and provided with a lock and key. It fits a single-gang box. There are no wire leads: there are screw terminals on the back for Down, Common, and Up. |
|
|
|
 |
| Key Operated 3-Position Switch (KS3 / SP-KSM) |
|
|
The KS3/SP-KSM is similar to Draper's standard 3-position control switch, but requires a key for operation. Two keys furnished. Low voltage or 115V |
|
|
|
|
|
 |
| Key Operated Power Supply Switch (KS-1) |
|
|
Useful with any control system for a Draper electrically operated projection screen, the KS-1 power supply switch mounts next to the operating switch and controls power to it. Low voltage or 115V. |
|
|
|
|
|
 |
| Locking Switch Cover Plate (SP-KPS-I) |
|
|
The SP-KPS-I Locking Switch Cover Plate features a 3-position control switch for limited access. The cover plate and locking switch cover are brushed stainless steel. Two keys furnished. 115V. |
|
|
|
|
|
 |
| VIC Override Switch (VIC-OS) |
|
|
The VIC-OS acts to lower a product when that product is normally controlled by one of the VICs, and it is not desired to activate that VIC. For example, a screen is controlled by a VIC-12, which activates upon the turning on of a video projector. Occasionally, an overhead or slide projector is used instead of the video projector. On these occasions, it is not desirable to turn on the video projector in order to lower the screen. This is where the VIC-OS could be used to lower the screen instead. |
|
|
|
|
|
|
Both screen and masking system are independently controlled, each using any standard or optional control offered above. Two SS-1Rs are standard. Or, select AMV-C, a low voltage control that allows both motors to be controlled by independent 3-button switches in a single box. |
|
|
|
|
|
 |
| Radio Frequency Remote Control (WRT/R) |
|
|
The WRT/R is a hand-held RF transmitter. 3-button control lets you change direction or adjust format at any point. The RF receiver plugs into the Draper low-voltage control unit, and must be ordered with the WRT/R. |
|
|
|
|
|
 |
| Infrared Remote Control (IRT/R) |
|
|
The IRT/R is an Infrared (IR) transmitter and receiver. 3-button operation for instant access to "up", "down", and "stop" functions. Fully compatible with "learnable" IR master control systems. Receiver plugs into the Draper low-voltage control unit, and must be ordered with the IRT/R. |
|
|
|
|
|
 |
| Low Voltage Control Module (LVC-III) |
|
|
The LVC-III is used to control one 115V motor in one of three ways: Low voltage wall switch, RF (radio frequency) or IR (infrared). Works with LVC-S, LVC-SL LED, WRT/R, IRT/R, SP-KSM, Aux. "dry" contacts and KS-1 Power Supply Switch. |
|
|
| |
|
|
The MC1 Control Board provides multiple options for screen, lift or shade motors. This simply designed, but powerful control board accepts 2-way serial communication, infrared commands via IR receiver, and relay closures found in home integration systems. Radio frequency is also available. Available as an external option for all motorized screens, AeroLifts, Micro Projector Lift and LCD Lift. Can also be factory installed in some screens.
The LS100 Internet Protocol Device allows the connection of ethernet devices, such as network and control systems to the MC1.
|
|
|
|
|
|
|
|
|
 |
Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically.
Model VIC115 integrates screen operation with a Draper video projector lift, or a video projector or tuner with a 115V switched outlet.
Models VIC12 & VIC6 interface screen operation with a video projector or tuner featuring a 12V switched outlet.
The VIC115, VIC12 & VIC6 may be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with an LVC-III, built-in or otherwise. |
|
|
|
|
| |
|
|
|
|
|
|
