 |
Heavy-Duty Legs for Cinefold instead of T-Legs (pr.)
Extra reinforcement against front-to-back movement. Strongly recommended for any screen over 7½' x 10', or for any screen used with a Dress Kit. |
|
 |
Standard T-Legs for Cinefold (pr.)
Constructed of sturdy 1" square hard-alloy structural aluminum tubing, clear etched and anodized for long life. Hinged inverted "T" shape, with rubber-tipped feet. |
|
 |
Anti-Sway Stabilizers for Cinefold (pr.) Heavy duty legs required.
Reinforce against side-to-side movement. May be mounted either inside or outside Cinefold leg. Recommended for screens over 10½' x 14' and for use with Dress Kits. |
|
 |
Screen Connection Clamps for Cinefold (pr.)
Join two or more screens for a really wide presentation. Clamps join screen frames from back, then Lshaped section wraps to front and accepts snaps on masking strips. |
|
 |
Screen Connection Strip for Cinefold(white or black)
Connection strips conceal hardware and provide image continuity. White masking for use with matt white; black for Cineflex. Works with screen connection clamps or hinge clamps. Specify height of screen. |
| |
|
 |
Hinge Clamps for Cinefold (pr.)
This screen connection clamp includes a hinge so the two screens can be set at an angle. |
|
 |
Standard Crank for Cinefold Used for all Cinefold and Truss Cinefold screens except as noted below |
|
 |
Short Crank for Cinefold For use only with L-Section at top of Truss Cinefold |
|
 |
Repair Kit for Cinefold with or without tools
All the tools and small parts you need to maintain a rental inventory of Cinefold screens.
Parts List (pdf) |
|
 |
Cinefold Case
Designed for service and dependability. Each case has two wheels. Handles are molded into each end of case. Lid handle is steel with rubber grip. Lid is secured with two adjustable straps. Stacks with lids on or nests compactly with lids off. Case for use with Ultimate Folding Screens, Ultimate Folding Dress Kits , Cinefold Screens and Cinefold Dress Kits. |
|
 |
StageHand for Cinefold
This handy little tool helps you save a lot of time and money by allowing one person to set up most folding screens. The StageHand is a simple device consisting of two “hooks” mounted on the end of a telescoping pole. The pole has a non-skid rubber tip. The hooks firmly hold and lift the top of a folding screen frame. Extend the pole to support the screen as a “third leg”. This frees the tech unfolding and lock the screen's legs. Then just lift the screen fully onto its feet and remove the hook. Draper’s StageHand comes in two sizes, to fit either 1" folding screen frames (like Draper's Cinefold) or 1 1/2" frames (like Draper's Ultimate Folding Screen). It telescopes from 65" to 120" in length, and is suitable for use with screens in sizes through 7'6" x 10'. MORE |
| |
|