Controls for Electric Screens

Choose from one of the following:

View All Controls
High Voltage Controls
Low Voltage Controls
Built-in Low Voltage Controls
Access MultiView Controls
220 Volt Controls


SS-1R  picture

SS-1R

Part number: 121001

The SS-1R is a standard control (silver plate, black switch) included with most Draper electrically operated screens (also available in white). 3-position rocker switch. Switch operation is sustained contact. Complete with single-gang cover plate. UL listed. 115V current. Also available in 220V.

U.S. Retail Price: $57


CE Tech Data Sheet

Tech Data Sheet


ILT Single Station Low Voltage Wall Switch picture

ILT Single Station Low Voltage Wall Switch

Part number: 121185

ILT Optional Single Station Low Voltage Wall Switch w/locking cover plate

U.S. Retail Price: $140



ILT Single Station Low Voltage Key Wall Switch picture

ILT Single Station Low Voltage Key Wall Switch

Part number: 121179

ILT Optional 3 Position Single Station Low Voltage Key Wall Switch (momentary)

U.S. Retail Price: $140



Low Voltage Control Module LVC-III picture

Low Voltage Control Module LVC-III

Part number: 121056

Two double-gang electrical boxes bolted together. One box contains the actual module, while the empty box is useful for making connections. The module contains a 3-screw terminal block for a wall switch, IR receiver jack, RF receiver jack, and a user-serviceable 5 A fuse.

U.S. Retail Price: $203


Tech Data Sheet

Serial & Network Wiring Guide

Tech Data Sheet 230V


LVC-III & LVC-S picture

LVC-III & LVC-S

Part number: 121057

The LVC-III and LVC-S is for single station low voltage control. The LVC-III is used to control one 115V motor in one of three ways: Low voltage wall switch/dry contact, RF (radio frequency) or IR (infrared). Works with LVC-S, LVC-SL LED, WRT/R, IRT/R, SP-KSM, Aux. "dry" contacts and KS-1 Power Supply Switch. The MC1 and LVC-III may be built into Signature V & E. Factory installed controls will increase the length of the case. Call for exact case length if this dimension is critical.

U.S. Retail Price: $245


LVC-III Tech Data Sheet

LVC-S Tech Data Sheet

Serial & Network Wiring Guide


Low Voltage Control with 2 Switches LVC-III, 2 LVC-S picture

Low Voltage Control with 2 Switches LVC-III, 2 LVC-S

Part number: 121058

The LVC-III low voltage control is used to control one 115V motor in one of three ways: Low voltage wall switch, RF (radio frequency) or IR (infrared). Works with LVC-S, LVC-SL LED, WRT/R, IRT/R, SP-KSM, Aux. "dry" contacts and KS-1 Power Supply Switch.

U.S. Retail Price: $303



Low Voltage Control Station LVC-S picture

Low Voltage Control Station LVC-S

Part number: 121059

The LVC-S (Low Voltage Control Switch) is a 3 position (UP, Stop, Down) switch mounted on white single gang panel that is used to control the LVC III (Low Voltage Control Module).

U.S. Retail Price: $58


Tech Data Sheet


WRT/R picture

WRT/R

Part number: 121062

The WRT/R is a hand-held RF transmitter. 3-button control lets you change direction or adjust format at any point. The RF receiver plugs into the Draper low-voltage control unit, and must be ordered with the WRT/R. Part No. 121062 includes receiver and remote.

U.S. Retail Price: $235


Tech Data Sheet


Wireless Transmitter, RF type, WRT picture

Wireless Transmitter, RF type, WRT

Part number: 121063

Hand-held radio frequency transmitter (WRT). 3-button control lets you stop or change direction at any point. Requires receiver and Draper low voltage control unit or MC1. Part number: 121063 includes remote only.

U.S. Retail Price: $147


Tech Data Sheet


Low Voltage Wall Switch picture

Low Voltage Wall Switch

Part number: 121171

This wall switch is for motors with built-in low voltage and features three buttons for “up”, “stop”, and “down” control. It is supplied with a 25’ RJ9 data cable. It also features 4 quick connect terminals to connect your own four conductor wire. The Low Voltage Wall Switch is necessary to set/adjust the motor limits and is supplied with the screen. Additional Low Voltage Wall Switches can be added to the screen in parallel.

U.S. Retail Price: $53


Tech Data Sheet

Instructions


3-Position Key Control Switch  KS-3 picture

3-Position Key Control Switch KS-3

Part number: 121018

KS-3 3-position key control switch (up-off-down). Two cam-operated Single-Pole, Single-Throw contact blocks (On-Off), wired to emulate Single-Pole, Double-Throw, Center Off (On-Off-On). Maintained action. Similar to Draper's standard 3-position control switch, but requires a key for operation. Low voltage or 115v. Two keys furnished.

U.S. Retail Price: $92


Tech Data Sheet


KS-1  picture

KS-1

Part number: 121017

Useful with any control system for a Draper electrically operated projection screen, the KS-1 power supply switch mounts next to the operating switch and controls power to it. Single-Pole, Single-Throw (On-Off). Maintained action. Low voltage or 115V.

U.S. Retail Price: $82


Tech Data Sheet


SP-KPS-I  picture

SP-KPS-I

Part number: 121019

The SP-KPS-I Locking Switch Cover Plate features a 3-position control switch for limited access. Single-Pole, Double-Throw, Center off (On-Off-On). Maintained action. The cover plate and locking switch cover are brushed stainless steel. Two keys furnished. 115V.

U.S. Retail Price: $108


Tech Data Sheet


MS-3R/MS-4R  picture

MS-3R/MS-4R

Part number: 121002

MS-3R and MS-4R are identical in appearance to Single Station Control. Automatic override allows only one signal to reach the motor when switches are operated simultaneously. Single-Pole, Triple-Throw (On-On-On). Momentary (spring-loaded) action. 115V current. Also available in 220V.

U.S. Retail Price: $113


Tech Data Sheet


Low Voltage Control Module LVC-III picture

Low Voltage Control Module LVC-III

Part number: 121056

Two double-gang electrical boxes bolted together. One box contains the actual module, while the empty box is useful for making connections. The module contains a 3-screw terminal block for a wall switch, IR receiver jack, RF receiver jack, and a user-serviceable 5 A fuse.

U.S. Retail Price: $203


Tech Data Sheet

Serial & Network Wiring Guide

Tech Data Sheet 230V


ILT RF Transmitter/Receiver picture

ILT RF Transmitter/Receiver

Part number: 121167

The ILT RF is a hand-held RF transmitter. 3-button control lets you change direction or adjust format at any point. The RF receiver plugs into the terminal block in the screen housing.

U.S. Retail Price: $242



AMV-C picture

AMV-C

Part number: 121048

Both screen and masking system are independently controlled. Two SS-1Rs are standard. Or, select AMV-C, a low voltage control that allows both motors to be controlled by independent 3-button switches in a single box. 121048 - white cover plate. 121049 - ivory cover plate.

U.S. Retail Price: $507



AMV-C picture

AMV-C

Part number: 121049

Both screen and masking system are independently controlled. Two SS-1Rs are standard. Or, select AMV-C, a low voltage control that allows both motors to be controlled by independent 3-button switches in a single box. 121048 - white cover plate. 121049 - ivory cover plate.

U.S. Retail Price: $507



WRT/R picture

WRT/R

Part number: 121062

The WRT/R is a hand-held RF transmitter. 3-button control lets you change direction or adjust format at any point. The RF receiver plugs into the Draper low-voltage control unit, and must be ordered with the WRT/R. Part No. 121062 includes receiver and remote.

U.S. Retail Price: $235


Tech Data Sheet


ILT IR Transmitter/Receiver picture

ILT IR Transmitter/Receiver

Part number: 121169

The ILT IR is an Infrared (IR) transmitter and receiver. 3-button operation for instant access to "up", "down", and "stop" functions. Fully compatible with "learnable" IR master control systems. The IR receiver plugs into the terminal block in the screen housing.

U.S. Retail Price: $123



ILT Extra IR Transmitter picture

ILT Extra IR Transmitter

Part number: 121170

ILT Extra IR Transmitter

U.S. Retail Price: $95



AMV-IR picture

AMV-IR

Part number: 121052

Both screen and masking system are independently controlled. AMV-IR has two multi-channel infrared controls, two receivers and one transmitter.

U.S. Retail Price: $760



AMV-IRW picture

AMV-IRW

Part number: 121053

Both screen and masking system are independently controlled. AMV-IRW has an IGC/3N1 controller, two wall switches w/built-in IR receivers and one IR transmitter

U.S. Retail Price: $722



DC Motor Control for Orbiter or Phantom picture

DC Motor Control for Orbiter or Phantom

Part number: 121161

DC Motor Control—Since Orbiter and Phantom have DC motors, this control unit is required for IR or RF remote control, or when interfacing with a master control system.

U.S. Retail Price: $250



Wireless Transmitter, RF type, WRT picture

Wireless Transmitter, RF type, WRT

Part number: 121063

Hand-held radio frequency transmitter (WRT). 3-button control lets you stop or change direction at any point. Requires receiver and Draper low voltage control unit or MC1. Part number: 121063 includes remote only.

U.S. Retail Price: $147


Tech Data Sheet


IRT/R   picture

IRT/R

Part number: 121065

The IRT/R is an Infrared (IR) transmitter and receiver. 3-button operation for instant access to "up", "down", and "stop" functions. Fully compatible with "learnable" IR master control systems. Receiver plugs into the Draper low-voltage control unit. Part number: 121065 includes the remote and receiver.

U.S. Retail Price: $95


Tech Data Sheet


Infrared Remote Transmitter IRT picture

Infrared Remote Transmitter IRT

Part number: 121066

Infrared transmitter (IRT). Must be used with receiver and low voltage control module or MC1. Part number: 121066 includes remote only.

U.S. Retail Price: $70


Tech Data Sheet


R2D7 for RS232 Serial Control picture

R2D7 for RS232 Serial Control

Part number: C156.066

R2D7-RS232 Translator

U.S. Retail Price: $178


Instructions


SP-KSM picture

SP-KSM

Part number: 121022

U.S. Retail Price: $92


Tech Data Sheet

SPKSM Technical Data Sheet


LVC-S with Locking Cover picture

LVC-S with Locking Cover

Part number: 121172

The LVC-S with Locking Cover Plate is a 3-button (Up, Stop, Down) wall switch which controls LVC III. Three individual Single Pole, Single Throw contacts (On/Off). Momentary action. The buttons are oval. The locking cover plate is metal, and provided with a lock and key. It fits a single-gang box. There are no wire leads: there are screw terminals on the back for Down, Common, and Up

U.S. Retail Price: $120


Tech Data Sheet


LVC-SL picture

LVC-SL

Part number: 121068

The LVC-SL is a lighted LVC-S which features 3-button switches, which are labeled "up", "down" and "stop". No preset sequence—push any button for desired function. White face plate included. Switch is optional for all Draper motorized screens. Switch must be used with Low Voltage Control Unit.

U.S. Retail Price: $88


Tech Data Sheet


MC1  picture

MC1

Part number: 121084

The MC1 Control Board provides multiple input control options for screen, lift or shade motors. This simply designed, but powerful control board accepts 2-way serial communication (with or without relay closure), infrared commands via IR receiver, and relay closures found in home integration systems. Available as an external option for all motorized screens, AeroLifts, and Micro Projector Lift. Can also be factory installed in some screens. The MC1 & VIC may be built into Access V & E. The MC1 and LVC-III may be built into Signature V & E. Factory installed controls will increase the length of the case. Call for exact case length is this dimension is critical. The MC1 Motor Control Board won a 2006 Gold Adex Award for Design Excellence.

U.S. Retail Price: $327


Tech Data Sheet

Technical Document (Install & Programming)

Technical Document - Wiring

Serial & Network Wiring Guide


MC1 & IRT/R picture

MC1 & IRT/R

Part number: 121090

The MC1 Control Board (with or without relay closure) and Infrared Control provides multiple input control options for screen, lift or shade motors. This simply designed, but powerful control board accepts 2-way serial communication, infrared commands via IR receiver, and relay closures found in home integration systems. Available as an external option for all motorized screens, AeroLifts, Micro Projector Lift and LCD Lift. Can also be factory installed in some screens. The MC1 & VIC may be built into Access V & E. The MC1 and LVC-III may be built into Signature V & E. Factory installed controls may increase the length of the case. Call for exact case length is this dimension is critical. The MC1 Motor Control Board won a 2006 Gold Adex Award for Design Excellence.

U.S. Retail Price: $417


Technical Document - Wiring

IRTR Tech Data Sheet

Serial & Network Wiring Guide


MC1 & LS100 picture

MC1 & LS100

Part number: 121177

The MC1 Control Board and Ethernet to Serial Bridge provides multiple input control options for screen, lift or shade motors. This simply designed, but powerful control board accepts 2-way serial communication, infrared commands via IR receiver, and relay closures found in home integration systems. Available as an external option for all motorized screens, AeroLifts, Micro Projector Lift and LCD Lift. Can also be factory installed in some screens. The MC1 & VIC may be built into Access V & E. The MC1 and LVC-III may be built into Signature V & E. Factory installed controls will increase the length of the case. Call for exact case length is this dimension is critical. The MC1 Motor Control Board won a 2006 Gold Adex Award for Design Excellence.

U.S. Retail Price: $577


Technical Document - Wiring

LS 100 Tech Data Sheet

Manual

Serial & Network Wiring Guide


MC1 & LVC-S picture

MC1 & LVC-S

Part number: 121086

The MC1 Control Board with single station wall switch provides multiple input control options for screen, lift or shade motors. This simply designed, but powerful control board accepts 2-way serial communication, infrared commands via IR receiver, and relay closures found in home integration systems. Available as an external option for all motorized screens, AeroLifts, and Micro Projector Lift. Can also be factory installed in some screens. The MC1 & VIC may be built into Access V & E. The MC1 and LVC-III may be built into Signature V & E. Factory installed controls will increase the length of the case. Call for exact case length is this dimension is critical. The MC1 Motor Control Board won a 2006 Gold Adex Award for Design Excellence.

U.S. Retail Price: $380


Technical Document - Wiring

LVCS Tech Data Sheet

Serial & Network Wiring Guide


MC1 & MC1-WRT/R picture

MC1 & MC1-WRT/R

Part number: 121092

The MC1 Control Board (with or without relay closure) and Wireless RF Control provides multiple input control options for screen, lift or shade motors. This simply designed, but powerful control board accepts 2-way serial communication, infrared commands via IR receiver, and relay closures found in home integration systems. Available as an external option for all motorized screens, AeroLifts, Micro Projector Lift and LCD Lift. Can also be factory installed in some screens. The MC1 & VIC may be built into Access V & E. The MC1 and LVC-III may be built into Signature V & E. Factory installed controls may increase the length of the case. Call for exact case length is this dimension is critical. The MC1 Motor Control Board won a 2006 Gold Adex Award for Design Excellence.

U.S. Retail Price: $627


Technical Document - Wiring

WRTR Tech Data Sheet

Serial & Network Wiring Guide


MC1 Splitter picture

MC1 Splitter

Part number: 121099

The MC1 Control Board Serial Splitter (for up to 4 MC1s to maintain 2-way serial communication with source) provides multiple input control options for screen, lift or shade motors. This simply designed, but powerful control board accepts 2-way serial communication, infrared commands via IR receiver, and relay closures found in home integration systems. Available as an external option for all motorized screens, AeroLifts, Micro Projector Lift and LCD Lift. Can also be factory installed in some screens. The MC1 & VIC may be built into Access V & E. The MC1 and LVC-III may be built into Signature V & E. Factory installed controls may increase the length of the case. Call for exact case length is this dimension is critical. The MC1 Motor Control Board won a 2006 Gold Adex Award for Design Excellence.

U.S. Retail Price: $67


Technical Document - Wiring


Control Station MS-4R picture

Control Station MS-4R

Part number: 121005

Draper MS-4R multiple-station controls are identical in appearance to Draper's SS-1R Single Station Control. Automatic override allows only one signal to reach the motor when switches are operated simultaneously. 115V current. Also available in 220V.

U.S. Retail Price: $57



VIC-115 picture

VIC-115

Part number: 121026

Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically. Model VIC115 integrates screen operation with a Draper video projector lift, or a video projector or tuner with a 115V switched outlet.

The MC1 & VIC may be built into Access V & E. Factory installed controls will increase the length of the case. Call for exact case length is this dimension is critical.

The VIC-115 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with an LVC-III, built-in or otherwise.

U.S. Retail Price: $133


Tech Data Sheet


VIC-12 picture

VIC-12

Part number: 121024

Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically. The VIC-12 interfaces screen operation with a video projector or tuner featuring a 12V switched outlet.

The MC1 & VIC may be built into Access V & E. Factory installed controls will increase the length of the case. Call for exact case length is this dimension is critical.

The VIC-12 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with an LVC-III, built-in or otherwise.

U.S. Retail Price: $133


Tech Data Sheet

Tech Data Sheet - 220V


VIC-6 picture

VIC-6

Part number: 121025

Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically. Model VIC-6 interfaces screen operation with a video projector or tuner featuring a 6V switched outlet. The MC1 & VIC may be built into Access V & E. Factory installed controls will increase the length of the case. Call for exact case length is this dimension is critical.

The VIC-6 can be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with an LVC-III, built-in or otherwise.

U.S. Retail Price: $133


Tech Data Sheet

Tech Data Sheet - 220V


VIC-OS  picture

VIC-OS

Part number: 121023

The VIC-OS acts to lower a product when that product is normally controlled by one of the VICs, and it is not desired to activate that VIC. For example, a screen is controlled by a VIC-12, which activates upon the turning on of a video projector. Occasionally, an overhead or slide projector is used instead of the video projector. On these occasions, it is not desirable to turn on the video projector in order to lower the screen. This is where the VIC-OS could be used to lower the screen instead. Double-Pole, Double-Throw (On-On). Maintained action.

U.S. Retail Price: $57


Tech Data Sheet


Video Interface Control VIC-12 Kit picture

Video Interface Control VIC-12 Kit

Part number: 121033

Video Interface Control - a relay with a COM/NC/NO contacts, and a 12 V coil, housed in a metal box for the Revelation screen.

U.S. Retail Price: $130


Tech Data Sheet