Heavy Duty Legs for Cinefold

Part number:

Part Number: 219006 (7-1/2')
Part Number: 219007 ( 9')
Part Number: 219008 ( 12')

For use instead of T-Legs. Extra reinforcement against front-to-back movement. Strongly recommended for any screen over 7-1/2' x 10', or for any screen used with a Dress Kit.

Standard T-Legs for Cinefold

Part number:

Part Number: 219009 (7-1/2')
Part Number: 219010 (9')
Part Number: 219011 (12')

Constructed of sturdy 1" square hard-alloy structural aluminum tubing, clear etched and anodized for long life. Hinged inverted "T" shape, with rubber-tipped feet.

Anti-Sway Stabilizers for Cinefold

Part number: 219001

Anti-Sway Stabilizers for use with Cinefold portable projection screens. Minimize side-to-side movement. May be mounted to inside or outside of Cinefold legs. Sold in pairs.

Screen Connection Clamps

Part number: 219002

Join two or more screens for a really wide presentation. Clamps join screen frames from back, then L-shaped section wraps to front and accepts snap-on connection strips for Cinefold.

Screen Connection Strips for Cinefold

Part number:

Connection Strips conceal hardware and provide image continuity. White for use with matt white fabric; black for use with Cineflex. Works with Screen Connection Clamps. Specify height of screen.

Hinge Clamps

Part number: 219003

Support two Cinefold screens side by side with a minimum gap between them. Screens may be set in a straight line or angled.

Standard Crank

Part number: 219004

Cranks for use in assembly of Cinefold or Ultimate Folding Screen. Cranks are 5/16" diameter by 2-1/4" long crankbolts, for quick assembly without tools.

Masking Strips for Cinefold

Masking Strips for Cinefold - Quickly and easily convert your HDTV folding screen to NTSC format with these black masking strips

Carrying Case

Part number: 219024

Part Number: 219024 – 45” Case
Part Number: 219025 – 52” Case
Part Number: 219026 – 58” Case

Designed for service and dependability. Each case has two wheels. Handles are molded into eachend of case. Lid handle is steel with rubber grip. Lid is secured with tow adjustable straps. Stacks with lids on or nests compactly with lids off. Case for use with UFS, UFS Dress Kits, Cinefold Screens, Cinefold Dress Kits and FocalPoint.

StageHand

Part number: 382125

This handy tool helps your save a lot of time and money by allowing one person to set up most folding screens. The StageHand is a simple device consisting of two "hooks" mounted on the end of a telescoping pole. The pole has a non-skid rubber tip. The hooks firmly hold and lift the top of a foldign screen frame. MORE

Instructions