 Draper’s new Flatscreen Display Lifts are the company’s premier lifts designed to raise a plasma or LCD flatscreen display out of your own custom cabinet or furniture. The Reveal/Conceal Flatscreen Display Lifts are clearly superior to similar products, with the most compact design but yet the greatest possible extension.
Always aiming high, Draper’s FlatScreen Lifts far surpass the competition. The “stored” dimensions are significantly more compact, and yet the maximum extended height is greater than any other model currently available. In addition, the interior dimensions of the cabinet only need to exceed the height of the stored lift by two inches. Draper's FlatScreen Lifts offer more flexibility for the installer or furniture manufacturer.
The FlatScreen Lifts utilizie a universal mounting bracket and easy “drop-in” installation into your cabinetry or furniture. In addition, it features a unique secondary shelf beneath the display itself, allowing you to attach a matching trim piece to fill the opening left by the open cabinet lid for a clean, finished appearance when raised.
 Attaching the secondary shelf is the only assembly that is required.
Lifting capacity is 210 lbs.
No display width limitation
Vertical extension up to 148% of its stored height
Overall depth: 4"
Overall height: 29.75"
Optional RS232/IR control
Travel Speed is 1-3/8" per second
Automactically switches to "creep" mode as it approaches "up" and "down" limits, to prevent jarring of display during operation
Adjustable limits to stop at any intermidiate point for the "show" position.
FSL-F-42
For display sizes up to and including 42" diagonal
Minimum required interior height of cabinet: 27-13/16"
Minimum required interor width of cabinet: is the width of display and speakers plus 2"
Universal mounting bracket is included
FSL-F-50
For display sizes up to and including 50" diagonal
Minimum required interior height of cabinet: 31-3/4"
Minimum required interor width of cabinet: is the width of display and speakers plus 2"
Universal mounting bracket is included
FSL-F-65
For display sizes up to and including 65" diagonal
Minimum required interior height of cabinet: 37-1/4"
Minimum required interor width of cabinet: is the width of display and speakers plus 2"
Universal mounting bracket is included: however, a display specific bracket and Draper's SMS WHT2 Flatscreen mount may be required.
|
